- Messages
- 2,430
- Reactions
- 4,503
- Ad Type
- For Sale
- Price
- $100
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Vancouver USA
- State
- Washington
- Zip Code
- 98683
Swage It for the Dillon 650.
Small and Large Prrimer Pocket
Low use Excellent Condition
$100
The following is copied from Swage It.
We are proud to announce the new V2 Swage It Primer Pocket Swager for the Dillon XL650 bullet press. Included is the mount, the small primer pin, and mounting hardware. Everything that you need to swage .223, .308, or any other calibers that utilize small or large primers. The V2 swager has been redesigned to drastically reduce any mount movement while swaging as well as some other minor design improvements.
Whats Different Between Version 1 vs Version 2?
On our original mount there were just 2 holes drilled into the mount and it would be attached by machine screws with locking washers. For most people that worked well but some complained that the mount would loosen while swaging. On the mount we have drilled and countersunk the holes as deep as we could to do 2 things. 1. By using the largest head sized tapered screws that we could source, the surface area of the tapered head will lock down the mount far better than the original design and 2. By going as deep as we could go with the taper, we are virtually eliminating any flex from the screws. Combine that with lowering the mounting holes by 0.010, the mount will lock into place securely with very little flex or movement.
Below are the list of benefits using our swager.
We are not in any way affiliated with Dillon Precision.
Face to Face FTF Fishers Landing Fred Meyer on se 164th Av East Vancouver ///// Or if we can meet up when I'm out and about I like to make easy if I can.
Will ship at cost...
USPS Small Flat Rate Priority $10.45
I do DISCREET PayPal as in no text or information and please remember to use the "Friends and Family" option so there are no fees.
OR...
Zelle.
OR....
USPS Money Order
Just for the record.
USPS has never lost one of my packages and I lost count of how many have made it a long time ago.
That being said I have to say....
Flat Rate shipping comes with $100 insurance.
If you want more it's on you..
Will gladly combine shipping.
Texting is easiest and fastest if you are interested.
If you are interested to see what else I have FOR SALE click on my Avatar and then click on the box that pops up then you can then slide to the right and click on "find" and then "find all threads by "misterarman"
Thanks for looking.
misterarman
AKA
John
360.771.0013
NRA Endowment Member
Member Clark Rifles, Inc.
Member Vancouver Rifle and Pistol
Member Oregon Arms Collectors
Small and Large Prrimer Pocket
Low use Excellent Condition
$100
The following is copied from Swage It.
We are proud to announce the new V2 Swage It Primer Pocket Swager for the Dillon XL650 bullet press. Included is the mount, the small primer pin, and mounting hardware. Everything that you need to swage .223, .308, or any other calibers that utilize small or large primers. The V2 swager has been redesigned to drastically reduce any mount movement while swaging as well as some other minor design improvements.
Whats Different Between Version 1 vs Version 2?
On our original mount there were just 2 holes drilled into the mount and it would be attached by machine screws with locking washers. For most people that worked well but some complained that the mount would loosen while swaging. On the mount we have drilled and countersunk the holes as deep as we could to do 2 things. 1. By using the largest head sized tapered screws that we could source, the surface area of the tapered head will lock down the mount far better than the original design and 2. By going as deep as we could go with the taper, we are virtually eliminating any flex from the screws. Combine that with lowering the mounting holes by 0.010, the mount will lock into place securely with very little flex or movement.
Below are the list of benefits using our swager.
- Machined from billet aerospace stainless steel.
- Heat Treated / Hardened to ensure longevity.
- Will not rust like tool steel.
- Properly re-sizing primer pockets can be achieved because our swager is frame mounted.
- You will never experience the swaging pin sticking inside the primer pocket or hitting the shell plate.
- No need to remove the rotary primer disk which means that you can swage in a matter of minutes without the need of time consuming disassembly of the primer system.
- The easiest setup available.
- Engineered to properly swage on the Dillon XL650.
- Our swager actually re-sizes the primer pocket and adds the correct fillet.
- Use your case feeder and swage over 1000 rounds per hour.
- Proudly Made In The USA!
- Patent Pending.
We are not in any way affiliated with Dillon Precision.
Face to Face FTF Fishers Landing Fred Meyer on se 164th Av East Vancouver ///// Or if we can meet up when I'm out and about I like to make easy if I can.
Will ship at cost...
USPS Small Flat Rate Priority $10.45
I do DISCREET PayPal as in no text or information and please remember to use the "Friends and Family" option so there are no fees.
OR...
Zelle.
OR....
USPS Money Order
Just for the record.
USPS has never lost one of my packages and I lost count of how many have made it a long time ago.
That being said I have to say....
Flat Rate shipping comes with $100 insurance.
If you want more it's on you..
Will gladly combine shipping.
Texting is easiest and fastest if you are interested.
If you are interested to see what else I have FOR SALE click on my Avatar and then click on the box that pops up then you can then slide to the right and click on "find" and then "find all threads by "misterarman"
Thanks for looking.
misterarman
AKA
John
360.771.0013
NRA Endowment Member
Member Clark Rifles, Inc.
Member Vancouver Rifle and Pistol
Member Oregon Arms Collectors
Last Edited:
