Member 5605
- Messages
- 11,671
- Reactions
- 23,700
Sold
Harbor Freight (Chicago Electric) dual drum (two 3lb drums)
Just like this:
http://www.amazon.com/Rotary-Dual-Tumbler-Lapidary-Polisher/dp/B0011GGL5K
$35
I've used it to tumble thousands of pieces of brass. Probably approaching the 10K mark. Had it three years-ish..
Upgrading....
$35 that's without media.
$60 with media (2lbs- 1lb per drum)
It fits (per side):
50x .308 cases
Or
150-200-ish 9mm
Or
125-150-ish .40
Or
100-ish .45
Or
75-100 .223
These levels it cleans on a 4 hour tumble. Use less brass and the cleaning time quickens. I typically run a half drum so I can get sparking clean in a 3 hour roll. 3 hours full will clean but not make them pop like new brass.
Prefer picked up within a semi local meeting. Say 25-30 minutes from Albany.
Just like this:
http://www.amazon.com/Rotary-Dual-Tumbler-Lapidary-Polisher/dp/B0011GGL5K
$35
I've used it to tumble thousands of pieces of brass. Probably approaching the 10K mark. Had it three years-ish..
Upgrading....
$35 that's without media.
$60 with media (2lbs- 1lb per drum)
It fits (per side):
50x .308 cases
Or
150-200-ish 9mm
Or
125-150-ish .40
Or
100-ish .45
Or
75-100 .223
These levels it cleans on a 4 hour tumble. Use less brass and the cleaning time quickens. I typically run a half drum so I can get sparking clean in a 3 hour roll. 3 hours full will clean but not make them pop like new brass.
Prefer picked up within a semi local meeting. Say 25-30 minutes from Albany.
Last Edited: