Sold - Kurt Thune Sling Model UIT-II - Like New

Discussion in 'Part & Accessory Classifieds' started by PlateRacer, May 20, 2012.

Thread Status:
Not open for further replies.
  1. PlateRacer

    PlateRacer
    Seattle, Washington
    Bronze Supporter Bronze Supporter

    Messages:
    187
    Likes Received:
    15
    The Kurt Thune Model II sling adds another buckle to the Model I design, which gives you separate control over the cuff size and sling length. In addition, each of those buckles can be moved, since they attach with low-profile screws. So you can customize the layout of the sling to pretty much any arm length or diameter. Distance between holes is only 10 mm giving the possibility to adjust the length very precisely for each shooter.
    The sling is made of an extremely strong cross-layed polyester. Important is that both sides are covered with PVC to avoid the frame from wearing out. This material is absolutely non-stretch and not affected by humidity like leather slings. Cuff (part around upper arm) of cross-layed polyester with non-slip area of natural rubber impossible to wear out.


    This is LIKE NEW - it was used one time (current going price on this is $95 from a dealer).

    Price dropped to $35 (was $50) (will ship for an additional $5)
     
  2. PlateRacer

    PlateRacer
    Seattle, Washington
    Bronze Supporter Bronze Supporter

    Messages:
    187
    Likes Received:
    15
    Still Available
     
  3. PlateRacer

    PlateRacer
    Seattle, Washington
    Bronze Supporter Bronze Supporter

    Messages:
    187
    Likes Received:
    15
    Price dropped to $35
     
Thread Status:
Not open for further replies.

Share This Page