Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

Sks trigger problems

Discussion in 'Maintenance & Gunsmithing' started by Bigbaddude, May 29, 2010.

  1. Bigbaddude

    Bigbaddude West linn Oregon Bronze Supporter Bronze Supporter

    Messages:
    369
    Likes Received:
    282
    CAN SEEM TO GET THE BOLT FOLLOWER DISCONNECTOR TO WORK RIGHT BEEN FIGHTING IT FOR HOURS.
    SICK OF MESSING WITH IT. IS THERE ANYBODY IN THE WEST LINN AREA I CAN TAKE IT TO?:help::help:
     
  2. Russianfist

    Russianfist Sweet home, Oregon Active Member

    Messages:
    348
    Likes Received:
    74
    Have you dis assembled the trigger group or do you just have it out of the gun?
     
  3. Bigbaddude

    Bigbaddude West linn Oregon Bronze Supporter Bronze Supporter

    Messages:
    369
    Likes Received:
    282
    found the problem the bolt follower disconnector was worn so it didn't go down far enought. so i built it back up with a small weld and filed down seems to work nice now. going to go see how it shoot on wednesday.
    i had that trigger apart so many time i think i could do it in the dark.
    not sure how to close this thread.
    thanks
    Don
     
  4. toobigtofail

    toobigtofail PDX Member

    Messages:
    212
    Likes Received:
    0
    I don't think you need to close non gun advert threads. Well, good on you, you did your own smithing. That's how I usually end up doing it. :D