Bronze Supporter
- Messages
- 627
- Reactions
- 778
- Ad Type
- For Sale
- Price
- $300
- Manufacturer
- Other / Not Listed
- Caliber
- 9mm
- City
- Oregon City
- State
- Oregon
- Zip Code
- 97045
Two Yugoslavian CZ99 9mm handguns. Take 15-shot 9mm magazines. Each gun has one factory magazine, factory magazines are for sale new from Zastava USA. I detail stripped and cleaned both guns, and test fired one (9mm is scarce right now).
I bought 4 brand new in wrap US Military issue Beretta M9 15 round mags. They are dimensionally the same as the Yugo mags and feed great and lock the slide open. You just have to copy the mag catch slot to them. Very easy DIY project, there are many video tutorials online to do this.
The gunsmith special part is one had messed up grip screws when I got it, I can't find replacements. The threads in the frame are perfectly fine, the screws from the other gun go in no problem. I tried CZ999/EZ9 screws and Sig P226/228 screws. The Sig screws are M4x.7 and the CZ999 screws are M5. The gun needs M4x.5 not .7 and I can't find them. You could probably drill and tap for the newer CZ999 M5 screws or replace the bushings in the frame with ones from a Sig. I am just tired of messing with these. I am going to take a big loss vs what I am into these.
I bought them for $320 each shipped plus the Beretta mags.Rid me of them for $500 and you can make these into nice cheap shooters. You will get both guns and 4 new Beretta mags. Add $20 for the CZ999 screws if you'd like to go that route. *I will sell both pistols (one still missing grip screws) for $300 for the pair with one mag each, I am returning the grip screws and selling the Beretta mags. If I still have the beretta mags you can buy them at a discount.*
Left - CZ99, Middle - CZ999, Right - Sig P226/228
I bought 4 brand new in wrap US Military issue Beretta M9 15 round mags. They are dimensionally the same as the Yugo mags and feed great and lock the slide open. You just have to copy the mag catch slot to them. Very easy DIY project, there are many video tutorials online to do this.
The gunsmith special part is one had messed up grip screws when I got it, I can't find replacements. The threads in the frame are perfectly fine, the screws from the other gun go in no problem. I tried CZ999/EZ9 screws and Sig P226/228 screws. The Sig screws are M4x.7 and the CZ999 screws are M5. The gun needs M4x.5 not .7 and I can't find them. You could probably drill and tap for the newer CZ999 M5 screws or replace the bushings in the frame with ones from a Sig. I am just tired of messing with these. I am going to take a big loss vs what I am into these.
I bought them for $320 each shipped plus the Beretta mags.
Left - CZ99, Middle - CZ999, Right - Sig P226/228
- I agree to the classified rules and terms of service
Last Edited: