- Messages
- 580
- Reactions
- 578
This was built buy a well known member in the mk12 forum of the big site. This is a laser. Top notch and clone correct upper. Painted. Stripped. Painted. Stripped. Lots of character.
- BA Stainless 16" recon barrel profiled for Ops 12th.
- Badger Crane Mk 12 gas block
- PRI Gen III Rifle-length Forearm in FDE
- Additional PRI full-length rail section on bottom (clone correct). Inner metal rail brackets have been milled down to fit the heat guard.
- Colt Keyhole upper receiver
Less than 250 rounds fired on this barrel.
$700
(Add $200 for the matching Atlas bipod)
No trades except for FGMM 175gr .308 (1k rounds)
See feedback for confidence.
- BA Stainless 16" recon barrel profiled for Ops 12th.
- Badger Crane Mk 12 gas block
- PRI Gen III Rifle-length Forearm in FDE
- Additional PRI full-length rail section on bottom (clone correct). Inner metal rail brackets have been milled down to fit the heat guard.
- Colt Keyhole upper receiver
Less than 250 rounds fired on this barrel.
$700
(Add $200 for the matching Atlas bipod)
No trades except for FGMM 175gr .308 (1k rounds)
See feedback for confidence.