- Messages
- 24
- Reactions
- 23
- Wanted Ad Type
- Want to Buy
- Manufacturer
- Winchester
- Caliber
- 30-06 Springfield
- City
- Seattle
- State
- Washington
- I have read and accept the classified system rules and terms of service.
looking to buy a M1 garand in 30-06!, preferably by International Harvester, Springfield or Winchester.
the manufacturer date or parts are matching do not really matter to me
anything higher than ~$1,500, let's talk about the condition and prior experience with the rifle
also looking for information with the ammunition since there is no real general consensus, what grain/fps/KJ's can a M1 generally shoot before it starts to become excessive for the gas block and Op-Rod tensile strength and at what point where the round would be too weak to cycle the bolt, I've found that generally anything below 160g/2700-2800fps range would be safe ?
P.S I have never done a transfer through a FFL from out of state, please be patient if a transaction oos occurs
also relatively new to NorthwestFirearms.com and will do my best to figure-out how the site works along the way
the manufacturer date or parts are matching do not really matter to me
anything higher than ~$1,500, let's talk about the condition and prior experience with the rifle
also looking for information with the ammunition since there is no real general consensus, what grain/fps/KJ's can a M1 generally shoot before it starts to become excessive for the gas block and Op-Rod tensile strength and at what point where the round would be too weak to cycle the bolt, I've found that generally anything below 160g/2700-2800fps range would be safe ?
P.S I have never done a transfer through a FFL from out of state, please be patient if a transaction oos occurs
also relatively new to NorthwestFirearms.com and will do my best to figure-out how the site works along the way