Hi Standard HDM/s

wired · May 5, 2023

Genuine WW2 vintage Hi Standard USA-HD set up as a HDM/s with new production very efficient silencer.

Be the only kid on the block with one. Suitable for framing and for shooting. Normally I do these built on HD Military which is what most folks associate with the suppressed pistols but the WW2 vintage guns are all USA HD's. I run across one every now and then and make it right. These USA-HD's are rare enough unsuppressed. New production fully modern suppressors installed. Clipped radial baffles, Chromoly tube. Barrel long enough to take full advantage of whatever ammo you want to run.

Built by yours truly .On a form 3. Price is shipped to your SOT dealer.

User 1234 · May 5, 2023

Does the pistol accept the silencer via a threaded barrel?

wired · May 5, 2023

User 1234 said:
Does the pistol accept the silencer via a threaded barrel?

Its an integral silencer. The barrel is threaded to accept the integral silencer rear cap at the rear and the baffle compression adjuster in front and to allow for sight clocking
. The silencer is not a standalone unit

User 1234 · May 5, 2023

wired said:
Its an integral silencer. The barrel is threaded to accept the integral silencer rear cap at the rear and the baffle compression adjuster in front and to allow for sight clocking
. The silencer is not a standalone unit

View attachment 1417076

I'm asking because of Washington's HB1240.

wired · May 5, 2023

User 1234 said:
I'm asking because of Washington's HB1240.

That's a tough one. Actually, I mean there is something I could do to permanently attach the tube, but the end of the tube would be threaded. Of course a completely sealed permanently attached can is always an option. Wouldn't be difficult.

wired · May 5, 2023

FWIW I started in on one today on a HD Military that will be somewhat cheaper than the USA Model H-D. Should be finished tomorrow. PM if interested. I can make it WA legal if needed.