- Messages
- 473
- Reactions
- 469
- Ad Type
- For Sale
- Price
- $70
- Manufacturer
- Other / Not Listed
- City
- Woodburn
- State
- Oregon
- Zip Code
- 97071
The Striker Control Device (SCD) replaces the slide cover plate on your Glock pistol. When thumb pressure is applied to the SCD it blocks the rearward motion of the striker, which blocks movement of the trigger bar and prevents the trigger from moving.
The SCD is completely passive. It does not lock or otherwise interfere with the normal operation of the pistol unless physical force is being purposely applied by the user. When using any normal firing grip, the SCD is not engaged and your pistol fires as usual with no additional steps needed.
The SCD was inspired by standard procedures for double action hammer fired guns. Users are taught to keep pressure on the hammer while holstering. In doing so, trigger motion is blocked and the gun is prevented from firing in the event that something (finger, shirt, thumb break, jacket drawstring, etc.) finds its way into the trigger guard. The SCD provides this same capability for Glock pistols.
The SCD provides an extra layer of safety when holstering. It does NOT replace awareness and safe gun handling. It creates an additional layer of safety to help avoid accidents. ALWAYS follow the four cardinal rules of firearms safety.
The SCD works with all Glock pistols. There are models available for Gen5 (which also includes the 19X, 17M, 19M, and G45), Gen1-4 (models 17–41), Slimline 9mm (43, 43X, 48), and G42. The SCD is designed to work with stock Glock triggers and aftermarket trigger components that do NOT alter pre-travel compared to the stock trigger. The Striker Control Device should NOT be used with aftermarket triggers that reduce pre-travel.
The SCD is CNC machined from 17-4PH stainless steel, has a black oxide finish, and is proudly made in the United States.
The SCD is completely passive. It does not lock or otherwise interfere with the normal operation of the pistol unless physical force is being purposely applied by the user. When using any normal firing grip, the SCD is not engaged and your pistol fires as usual with no additional steps needed.
The SCD was inspired by standard procedures for double action hammer fired guns. Users are taught to keep pressure on the hammer while holstering. In doing so, trigger motion is blocked and the gun is prevented from firing in the event that something (finger, shirt, thumb break, jacket drawstring, etc.) finds its way into the trigger guard. The SCD provides this same capability for Glock pistols.
The SCD provides an extra layer of safety when holstering. It does NOT replace awareness and safe gun handling. It creates an additional layer of safety to help avoid accidents. ALWAYS follow the four cardinal rules of firearms safety.
The SCD works with all Glock pistols. There are models available for Gen5 (which also includes the 19X, 17M, 19M, and G45), Gen1-4 (models 17–41), Slimline 9mm (43, 43X, 48), and G42. The SCD is designed to work with stock Glock triggers and aftermarket trigger components that do NOT alter pre-travel compared to the stock trigger. The Striker Control Device should NOT be used with aftermarket triggers that reduce pre-travel.
The SCD is CNC machined from 17-4PH stainless steel, has a black oxide finish, and is proudly made in the United States.
