- Messages
- 473
- Reactions
- 469
- Ad Type
- For Sale
- Price
- $450
- Manufacturer
- Glock
- City
- Woodburn
- State
- Oregon
- Zip Code
- 97071
G19 Gen 5 stripped slide. This slide was custom milled by Jagerwerks for a 509T with irons forward, top pocket, edge cuts, and black nitride coating.
Jagerwerks Milling:
• 509T milling, rear irons IN FRONT of optic
• Black nitride coating
• Dawson irons installed
• Chamfer corner cut
• Top front pocket cut
• Carbon back plate (included)
• $290 current cost from Jagerwerks for this milling package
Condition is excellent.
I estimate a maximum of 300 rounds through the gun. There is a small slight spot of holster wear on sides of slide, see images.
Note: this optic cut is for the regular Holosun 509T, it will NOT fit a 509T with the custom Vulcan reticle, those are a few millimeters longer.
To my knowledge, this slide with fit a G19, G45, and G47. Firing pin channel liner and JW back plate are included, no other internals.
Jagerwerks Milling:
• 509T milling, rear irons IN FRONT of optic
• Black nitride coating
• Dawson irons installed
• Chamfer corner cut
• Top front pocket cut
• Carbon back plate (included)
• $290 current cost from Jagerwerks for this milling package
Condition is excellent.
I estimate a maximum of 300 rounds through the gun. There is a small slight spot of holster wear on sides of slide, see images.
Note: this optic cut is for the regular Holosun 509T, it will NOT fit a 509T with the custom Vulcan reticle, those are a few millimeters longer.
To my knowledge, this slide with fit a G19, G45, and G47. Firing pin channel liner and JW back plate are included, no other internals.
