- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Hillsboro
- State
- Oregon
- Zip Code
- 97124
Built this gun for ELR, its chambered in 338 norma improved. It will outperform a 338 lapua and feed 300grain bullets from a magazine. The headspacing is equivalent to 338 norma, so you simply shoot 338 norma to form the the 38degree improved case. Fireform loads with h1000 were capable of 1/4-1/2 moa and fully formed loads 1/4moa. 120 rounds fired. I am wanting to sell only barreled action, but have listed other combination options.
Heres the details:
Kelbly atlas tactical lapua bolt face, nitrided with HD bolt stop upgrade
Bartlein 9.3 twist MTU finished at 27"
Piercision 3/4-24 slabbed muscle brake
geissle super 700 2 stage trigger
barreled action with trigger- $2,000
w/out trigger-$1800
I will not sell stock separately, as I want to keep it, but would sell rifle with like new manners t2a GAP elite w/gen 2 mini chassis, flush cups front/rear, and 3 aics CIP length magazines $3,300.
Will sell rifle with stock, mags, and like new leupold mark 5HD 5x25x56 cch reticle mil mounted in mark 4 rings for $5,000.
Will not sell scope or stock separately.
Whidden bushing die and Peterson brass can be included at extra cost.
Absolutely NO TRADES.
Pictured below are fireforming groups with h1000.
comparison pic between 308win loaded w/208 eldm vs 338Norma improved loaded with 300 berger otm.
Heres the details:
Kelbly atlas tactical lapua bolt face, nitrided with HD bolt stop upgrade
Bartlein 9.3 twist MTU finished at 27"
Piercision 3/4-24 slabbed muscle brake
geissle super 700 2 stage trigger
barreled action with trigger- $2,000
w/out trigger-$1800
I will not sell stock separately, as I want to keep it, but would sell rifle with like new manners t2a GAP elite w/gen 2 mini chassis, flush cups front/rear, and 3 aics CIP length magazines $3,300.
Will sell rifle with stock, mags, and like new leupold mark 5HD 5x25x56 cch reticle mil mounted in mark 4 rings for $5,000.
Will not sell scope or stock separately.
Whidden bushing die and Peterson brass can be included at extra cost.
Absolutely NO TRADES.
Pictured below are fireforming groups with h1000.
comparison pic between 308win loaded w/208 eldm vs 338Norma improved loaded with 300 berger otm.
- I agree to the classified rules and terms of service
Last Edited: