- Messages
- 285
- Reactions
- 315
- Ad Type
- For Sale
- Price
- $1250
- Manufacturer
- Dillon Precision
- Caliber
- Other / Not Listed
- City
- RIDGEFIELD
- State
- Washington
- Zip Code
- 98642
Bought this last year from someone here, and spent a lot of time talking with Dillon as I rebuilt the entire press. I originally bought this for a designated large primer station, and I will say, it works fantastic. Reason I'm parting with it is I prefer my RL1100 due to the extra stations.
So figure I would part with it. Picture shows everything that was replaced straight from Dillon, and still have all the factory parts that were upgraded.
XL650 has the large primer dial (sorry, do not have the small),
Case feeder with new variable speed feeder installed (no case feeder plates), powder through die, Comes with 3 toolheads (2 Dillon toolheads, and one aluminum), and 2 toolhead stands/holders.
Now for the upgrades:
Roller handle (Do not have the original handle/arm)
Hit factor Ejector
Armonov quick disconnect powder measure
From Entirely Crimson:
Enhanced Live primer chute
Index bearing cam block
Case Feed Bearing Camming Pin
Spent Primer Chute with tubing
Speed nut for powder measure return
Powder Measure Return Rod Bushing
From Reloading innovation:
Spill stops #1
Shell Plate bearing kit
Teflon Low Mass Detent Ball
Inline Fabrication:
Ultramount Press Riser
Double Bullet tray assembly
Toolhead dock for 650
Also including the 45 ACP conversion Kit (currently installed) and the 308 conversion kit.
As an added bonus, I will throw in 1000 large rifle primers.
Also have a Dillon 45 ACP carbide sizing die I'll include.
Price: $1250 **SOLD TO GARRETT2021**
Not looking for any trades at this time
So figure I would part with it. Picture shows everything that was replaced straight from Dillon, and still have all the factory parts that were upgraded.
XL650 has the large primer dial (sorry, do not have the small),
Case feeder with new variable speed feeder installed (no case feeder plates), powder through die, Comes with 3 toolheads (2 Dillon toolheads, and one aluminum), and 2 toolhead stands/holders.
Now for the upgrades:
Roller handle (Do not have the original handle/arm)
Hit factor Ejector
Armonov quick disconnect powder measure
From Entirely Crimson:
Enhanced Live primer chute
Index bearing cam block
Case Feed Bearing Camming Pin
Spent Primer Chute with tubing
Speed nut for powder measure return
Powder Measure Return Rod Bushing
From Reloading innovation:
Spill stops #1
Shell Plate bearing kit
Teflon Low Mass Detent Ball
Inline Fabrication:
Ultramount Press Riser
Double Bullet tray assembly
Toolhead dock for 650
Also including the 45 ACP conversion Kit (currently installed) and the 308 conversion kit.
As an added bonus, I will throw in 1000 large rifle primers.
Also have a Dillon 45 ACP carbide sizing die I'll include.
Price: $1250 **SOLD TO GARRETT2021**
Not looking for any trades at this time
- I agree to the classified rules and terms of service
Last Edited: