- Ad Type
- For Sale
- Price
- $1999
- Manufacturer
- CZ
- Caliber
- 7.62x39mm
- City
- Hillsboro
- State
- Oregon
- Zip Code
- 97124
IF YOU HAVE WANTED / BEEN LOOKING FOR THE "RIGHT" CZ BREN 2ms THIS IS "THE ONE". "TURN KEY" PACKAGE IS UPGRADED, ACCESSORIZED, INCLUDES 500 ROUNDS OF AMMUNITION AND PRICED LOW FOR A QUICK SALE.
I've had some / facing future "changes" and I won't be able to follow through with the plans I had for this CZ (wanting to SBR it).. that being said I'm offering this at a substantial "discount" and the next person can finish / make this firearm the stuff dreams are made of..
I recently traded into this as follows ~
It was listed at $2200 dollars and had the SB tactical brace on it and came with six magazines / prior owner stated it has a round count of no more than 500.
Now onto the post ~
CZ BREN 2ms chambered in 7.62x39
9" inch CHF barrel
Ambitious controls / well thought out
Factory F/R folding buis / sights
I intended to "SBR" this and purchased from CZ there 922r conversion kit that includes:
* 7" inch rail (longer than the factory rail and has more m-lok mounting points / NOT INSTALLED
* Receiver mounting plates
* Factory CZ folding / adjustable stock
>>> MUST HAVE APPROVED SBR TAX STAMP TO MOUNT / INSTALL <<<
* The kit also includes a "operating rod assembly and "disconnector" but these parts are only for the 556 variant (everything else is compatible with the 7.62x39).
* I ordered HBI Handguard QD mounting plates to replace the "Receiver Plates" that came with the CZ "kit" so you end up with "ambi" QD sling mounting points forward that mirror the rear QD "ambi" sling mounts.
ADDITIONAL ITEMS / UPGRADES
* HBI TRIGGER (tungsten in color)
The factory trigger isn't bad at all but this one is metal and removes the "take up" in the factory trigger (NOT INSTALLED)
* HBI Extended / "offset" Charge Handle (black in color / NOT INSTALLED)
* HBI QD Mounting Plates (to be installed with the new handguard)
* Four new in package 30 round CZ windowed magazines (ten 30 round magazines in total)
* 500 rounds of fmj 7.62x39 ammunition (good stuff) Arsenal of Bulgaria steel case with sealed primer / neck packaged in "50 cal" ammo can
I paid $750 dollars for the above mentioned additional items
I'm going to price this $200 dollars LESS then the original $2200 dollar asking price that I "traded" into this.
Considering your getting the $750 dollars in extras and "lower than original price" this is an excellent deal.
* Pictured hand / finger stop and rail covers not included
The reason I'm selling this CZ ~ "changes current and future" is going to require cash / also why I CAN NOT ACCEPT TRADES.
$1999 dollars cash / I won't respond to low-ball offers.
Sale to take place at A Cut Above Pawn or Tigard Pawn 4 More
Thanks for checking out the post
I've had some / facing future "changes" and I won't be able to follow through with the plans I had for this CZ (wanting to SBR it).. that being said I'm offering this at a substantial "discount" and the next person can finish / make this firearm the stuff dreams are made of..
I recently traded into this as follows ~
It was listed at $2200 dollars and had the SB tactical brace on it and came with six magazines / prior owner stated it has a round count of no more than 500.
Now onto the post ~
CZ BREN 2ms chambered in 7.62x39
9" inch CHF barrel
Ambitious controls / well thought out
Factory F/R folding buis / sights
I intended to "SBR" this and purchased from CZ there 922r conversion kit that includes:
* 7" inch rail (longer than the factory rail and has more m-lok mounting points / NOT INSTALLED
* Receiver mounting plates
* Factory CZ folding / adjustable stock
>>> MUST HAVE APPROVED SBR TAX STAMP TO MOUNT / INSTALL <<<
* The kit also includes a "operating rod assembly and "disconnector" but these parts are only for the 556 variant (everything else is compatible with the 7.62x39).
* I ordered HBI Handguard QD mounting plates to replace the "Receiver Plates" that came with the CZ "kit" so you end up with "ambi" QD sling mounting points forward that mirror the rear QD "ambi" sling mounts.
ADDITIONAL ITEMS / UPGRADES
* HBI TRIGGER (tungsten in color)
The factory trigger isn't bad at all but this one is metal and removes the "take up" in the factory trigger (NOT INSTALLED)
* HBI Extended / "offset" Charge Handle (black in color / NOT INSTALLED)
* HBI QD Mounting Plates (to be installed with the new handguard)
* Four new in package 30 round CZ windowed magazines (ten 30 round magazines in total)
* 500 rounds of fmj 7.62x39 ammunition (good stuff) Arsenal of Bulgaria steel case with sealed primer / neck packaged in "50 cal" ammo can
I paid $750 dollars for the above mentioned additional items
I'm going to price this $200 dollars LESS then the original $2200 dollar asking price that I "traded" into this.
Considering your getting the $750 dollars in extras and "lower than original price" this is an excellent deal.
* Pictured hand / finger stop and rail covers not included
The reason I'm selling this CZ ~ "changes current and future" is going to require cash / also why I CAN NOT ACCEPT TRADES.
$1999 dollars cash / I won't respond to low-ball offers.
Sale to take place at A Cut Above Pawn or Tigard Pawn 4 More
Thanks for checking out the post
- I agree to the classified rules and terms of service
Last Edited: