- Messages
- 73
- Reactions
- 12
I've been in the special operations community and a sniper and instructor for over 20 years and this is by far the most accurate 5.56 weapon I've ever seen-better than all but a couple 7.62 bolt guns. I recently bought this weapon from a fellow board member who had barely broken it in. I bought it for an upcoming mission with the idea it would then be my 3 gun as well as long range coyote gun. Well as happens I get this rifle to right where I want it and then mission specs change, wife loses job so I can't just put this in the safe.
Daniel Defense 18inch strength to weight barrel....hammer forged, nitrade bathed. Upper has DD 12 inch free float tube with full length monorail, 3 moveable rail sections, rail is marked and barrel is 1/7 twist. Properly stated gas key,MP tested low profile gas block m4 feed ramps. Geisselle SSA(super semi auto) trigger. This is their 2 stage version...2.5lb first stage with a very smooth transition to a 2lb second stage.
Custom add ons-Magpul flip up BUIS in OD green
Magpul widened trigger guard OD green
Magpul Miad pistol grip Multiple grip panels, hollow inside holds 3 emergancy rounds OD green
Magpul CTR adj buttstock OD green
Magpul angled foregrip OD green
Voo Doo tactical single point sling OD green
SJC Titan Compensator
7 Magpul PMags with dust covers in OD GREEN 6 of them still in original packaging Brand New
Ambi safety installed
BCM Gunfighter charging handle
Comes in cheap plastic case
This rifle has under 200 rounds through it. With my match and combat load (Black Hills w/77 gr SMKs) I have managed sveral groups under.25 MOA at 100 yards and shoots sub MOA beyond 600 yards. This rifle also loves Hornady TAP and 69grain Federal match. It feeds from PMAGS all the way down to GI surplus. Zero recoil with the Titan comp however it comes with orig thread protector should you want to remove it, also will come with orig single sided safety. All new parts have been blue lock tited. $1850..trades listed below.
Kimber,Springfield,SIG,S&W 5 inch 1911 45ac
Glock 26,34,19
Springield XDm 5.25 9mm/45acp
S&W M&P Pro or Core 9mm/M&Pc9
S&W custom shop or Pro Series Revolver
Sig p226 tac ops 9mm
Sig M11 a1
Single action revolver
J frame snub
Henry rifle
22lr revolver SW
Note....if for professional needs like me or just cheap plinkink you use 62 gr steel penetrators on occasion stick to shooting vehicles or steel doors like I do......you won't hit anything smaller.....this laser of a rifle hates those green tips.....avg is 3 moa. If you need cheap it will often bust moa with cheap russian steel case
Daniel Defense 18inch strength to weight barrel....hammer forged, nitrade bathed. Upper has DD 12 inch free float tube with full length monorail, 3 moveable rail sections, rail is marked and barrel is 1/7 twist. Properly stated gas key,MP tested low profile gas block m4 feed ramps. Geisselle SSA(super semi auto) trigger. This is their 2 stage version...2.5lb first stage with a very smooth transition to a 2lb second stage.
Custom add ons-Magpul flip up BUIS in OD green
Magpul widened trigger guard OD green
Magpul Miad pistol grip Multiple grip panels, hollow inside holds 3 emergancy rounds OD green
Magpul CTR adj buttstock OD green
Magpul angled foregrip OD green
Voo Doo tactical single point sling OD green
SJC Titan Compensator
7 Magpul PMags with dust covers in OD GREEN 6 of them still in original packaging Brand New
Ambi safety installed
BCM Gunfighter charging handle
Comes in cheap plastic case
This rifle has under 200 rounds through it. With my match and combat load (Black Hills w/77 gr SMKs) I have managed sveral groups under.25 MOA at 100 yards and shoots sub MOA beyond 600 yards. This rifle also loves Hornady TAP and 69grain Federal match. It feeds from PMAGS all the way down to GI surplus. Zero recoil with the Titan comp however it comes with orig thread protector should you want to remove it, also will come with orig single sided safety. All new parts have been blue lock tited. $1850..trades listed below.
Kimber,Springfield,SIG,S&W 5 inch 1911 45ac
Glock 26,34,19
Springield XDm 5.25 9mm/45acp
S&W M&P Pro or Core 9mm/M&Pc9
S&W custom shop or Pro Series Revolver
Sig p226 tac ops 9mm
Sig M11 a1
Single action revolver
J frame snub
Henry rifle
22lr revolver SW
Note....if for professional needs like me or just cheap plinkink you use 62 gr steel penetrators on occasion stick to shooting vehicles or steel doors like I do......you won't hit anything smaller.....this laser of a rifle hates those green tips.....avg is 3 moa. If you need cheap it will often bust moa with cheap russian steel case
Last Edited:
