- Messages
- 94
- Reactions
- 3
So here is what I have as a project that I started and it is just sitting in the safe. I might as well sell it to someone that will finish it and use it. The Frame and Slide have already been fitted at the factory. All that is needed to complete is a barrel, guide-rod, and sights, firing pin, and fp stop.
Stainless Caspian XR Frame (Sig GSR Contract Overrun) $269
Stainless Caspian XR .45 Slide (Novak Sight Cuts) $313
External Extractor (Installed and Included)
Stainless Caspian Beaver-tail $50
Stainless, STI Ambi-Safety $47
Pin Set $22
Mag Catch $20
Slide Stop $20
EGW Ignition Set $80
10-8 Short Flat Trigger $25
STI Composite MSH ?
Rosewood Grips, Bushings, and Screws $50
TJs Series 80 adapter plate $5
Stainless Plunger Tube $10
The prices listed above are from Brownells or Caspian for parts totals. The frame and slide are for similar units, as configured at Caspian these costs are much higher. Total parts prices are $913. How about $650 plus shipping or FTF in WA. E-mail Questions to:
[email protected]
Stainless Caspian XR Frame (Sig GSR Contract Overrun) $269
Stainless Caspian XR .45 Slide (Novak Sight Cuts) $313
External Extractor (Installed and Included)
Stainless Caspian Beaver-tail $50
Stainless, STI Ambi-Safety $47
Pin Set $22
Mag Catch $20
Slide Stop $20
EGW Ignition Set $80
10-8 Short Flat Trigger $25
STI Composite MSH ?
Rosewood Grips, Bushings, and Screws $50
TJs Series 80 adapter plate $5
Stainless Plunger Tube $10
The prices listed above are from Brownells or Caspian for parts totals. The frame and slide are for similar units, as configured at Caspian these costs are much higher. Total parts prices are $913. How about $650 plus shipping or FTF in WA. E-mail Questions to:
[email protected]