- Messages
- 20
- Reactions
- 31
- Ad Type
- For Sale
- Price
- $315
- Manufacturer
- BCM
- Caliber
- 5.56x45mm NATO
- City
- Portland
- State
- Oregon
- Zip Code
- 97202
Factory complete BCM lower, with BCM PNT trigger. Unfired and otherwise new. Never been mounted to an upper. Purchased three years ago from G&R Tactical as a blem. There is slight staining in anodizing near trigger and hammer pins, see photos.
Willing to throw in a BCM ambi safety if you want it.
Local sale, cash only. Reasonable offers considered. No trades.
Here is the description copied and pasted from from G&R (LWR-BCM-BLEM).
"BCM BLEM AR15 Lower. Comes with everything shown in the above pic (GF MOD3 Grip, BCM PNT FCG and BCM's QD plate). In most instances, we cannot find a single mark or scratch on these. There are however classified as a blem product from BCM.
"SPECS:
"Machined from Aluminum Forgings 7075-T6
"Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
"BCM® Milspec 7075-T6 Receiver Extension
"Staked M4 Lock Nut
"USGI H Buffer (1 USGI Tungsten, 2 Steel)
"BCM Trigger Guard
"Low Shelf for RDIAS installation
"Low Shelf for Accuwedge use
"Un-notched Hammer compatible with 9mm use
"Fire Controls marked SAFE and SEMI
"BCM PNT Trigger Assembly"
Willing to throw in a BCM ambi safety if you want it.
Local sale, cash only. Reasonable offers considered. No trades.
Here is the description copied and pasted from from G&R (LWR-BCM-BLEM).
"BCM BLEM AR15 Lower. Comes with everything shown in the above pic (GF MOD3 Grip, BCM PNT FCG and BCM's QD plate). In most instances, we cannot find a single mark or scratch on these. There are however classified as a blem product from BCM.
"SPECS:
"Machined from Aluminum Forgings 7075-T6
"Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
"BCM® Milspec 7075-T6 Receiver Extension
"Staked M4 Lock Nut
"USGI H Buffer (1 USGI Tungsten, 2 Steel)
"BCM Trigger Guard
"Low Shelf for RDIAS installation
"Low Shelf for Accuwedge use
"Un-notched Hammer compatible with 9mm use
"Fire Controls marked SAFE and SEMI
"BCM PNT Trigger Assembly"
Last Edited:
