Silver Supporter
- Messages
- 697
- Reactions
- 53
SOLD
$850 - Armalite 16" Lightweight Carbine
This used to be Armalite's standard carbine that I purchased used from another individual. It's the lightweight profiled barrel, resulting in a ~7.5-8 pound rifle. The rifle works well with no failures. There is some slight damage to the muzzle threads (looks like it was cut slightly) so I would only recommend a flash hider or Muzzle Brake. To compensate, I'm including a very nice PWS muzzle brake. Additionally, the original handguards used to be green, but someone spray painted them black. I have other handguards (shown), but they have been modified to fit and include a top and bottom rail for a light/bipod.
Barrel: 16" lightweight profile, threaded 5/8x24
Gas System: Midlength gas
Reciever: Late model AR-10 forged receivers with no forward assist, flat-top
Other: Ergo grip, CavArms A1 buttstock, PWS Brake.
If there's something you don't like (brake, handguards, grip, etc. I can swap it out very quickly.
Located in Hillsboro, OR.
Extra items that would go with this:
- 2x 20rd. Gen 2 mags (new in wrapper) - $25/ea.
- 10x 25rd. Gen 2 mags (3x used, 7x new in wrapper) - $35/ea.
- 1x 10rd. Gen 1 mag - included with rifle.
If interested PM me or write [email protected].
Only trades I'm interested in at the moment would be a Kel-Tec RFB, Steyr AUG/MSAR/TPD AXR, or Mega MA-TEN receiver set.
Update: I've received a few questions about the muzzle threads. I've taken the best picture I can. It's not very deep, and shouldn't effect anything.
$850 - Armalite 16" Lightweight Carbine
This used to be Armalite's standard carbine that I purchased used from another individual. It's the lightweight profiled barrel, resulting in a ~7.5-8 pound rifle. The rifle works well with no failures. There is some slight damage to the muzzle threads (looks like it was cut slightly) so I would only recommend a flash hider or Muzzle Brake. To compensate, I'm including a very nice PWS muzzle brake. Additionally, the original handguards used to be green, but someone spray painted them black. I have other handguards (shown), but they have been modified to fit and include a top and bottom rail for a light/bipod.
Barrel: 16" lightweight profile, threaded 5/8x24
Gas System: Midlength gas
Reciever: Late model AR-10 forged receivers with no forward assist, flat-top
Other: Ergo grip, CavArms A1 buttstock, PWS Brake.
If there's something you don't like (brake, handguards, grip, etc. I can swap it out very quickly.
Located in Hillsboro, OR.
Extra items that would go with this:
- 2x 20rd. Gen 2 mags (new in wrapper) - $25/ea.
- 10x 25rd. Gen 2 mags (3x used, 7x new in wrapper) - $35/ea.
- 1x 10rd. Gen 1 mag - included with rifle.
If interested PM me or write [email protected].
Only trades I'm interested in at the moment would be a Kel-Tec RFB, Steyr AUG/MSAR/TPD AXR, or Mega MA-TEN receiver set.
Update: I've received a few questions about the muzzle threads. I've taken the best picture I can. It's not very deep, and shouldn't effect anything.
If eather had a 20+ barrel id have it transfered! GL nice rifles
