- Messages
- 28
- Reactions
- 5
Hi all,
I have decided to get rid of some of my collection.
This gun has never been shot before!
Specs are as follows:
Upper Receiver
Barrel 16" Chambered 5.56 NATO Parkerized Finish M4 Feed Ramps 1:7 Twist
Upper Mil Spec Complete Upper Receiver M4 Feed Ramps, Charging Handle, Ejection Port Cover Forward Assist Made from 7075-T6 Aluminum
Gas Block Low-Profile Gas Block
Gas Tube Carbine Length Stainless Steel
Hand Guard 15" MLok Gen 2 Free-Float Handguard
Flash/Comp Black A2
BCG 8620 steel bolt carrier, staked to Milspec with grade 8 hardware
Charging Handle Milspec T7075 Aluminum
Chamber 5.56 NATO
Rail/Handguard MLOK Gen 2 Free Float Handguard lightweight hardcoat anodized for corrosion resistance
Lower
Made from a 7075-T6 Forged Aluminum Billet
Produced using state of the art CNC machining
FIRE/SAFE safety selector markings
MIL-A-8625F Type 3 Class 2 Black Hardcoat Anodized Finish
Marked Multi Cal
The Bolt Hold Open Hole is threaded and comes with a bolt hold open screw, which allows for:
Easier installation, no more driving a roll pin just use a 1.5 hex wrench
Allows the user to remove the bolt hold open easily, handy when using a 9mm top down magazine adapter
COMES INSTALLED WITH:
Lower Parts Kit
Enchanced 6 Position Mil-Spec Diameter Stock With Recoil Pad
I will consider reasonable offers! I am more than happy to go test fire this gun with you at the range as long as I have cash in hand. Id like to get 700. I think thats a bargain for a free floated ar15
I have decided to get rid of some of my collection.
This gun has never been shot before!
Specs are as follows:
Upper Receiver
Barrel 16" Chambered 5.56 NATO Parkerized Finish M4 Feed Ramps 1:7 Twist
Upper Mil Spec Complete Upper Receiver M4 Feed Ramps, Charging Handle, Ejection Port Cover Forward Assist Made from 7075-T6 Aluminum
Gas Block Low-Profile Gas Block
Gas Tube Carbine Length Stainless Steel
Hand Guard 15" MLok Gen 2 Free-Float Handguard
Flash/Comp Black A2
BCG 8620 steel bolt carrier, staked to Milspec with grade 8 hardware
Charging Handle Milspec T7075 Aluminum
Chamber 5.56 NATO
Rail/Handguard MLOK Gen 2 Free Float Handguard lightweight hardcoat anodized for corrosion resistance
Lower
Made from a 7075-T6 Forged Aluminum Billet
Produced using state of the art CNC machining
FIRE/SAFE safety selector markings
MIL-A-8625F Type 3 Class 2 Black Hardcoat Anodized Finish
Marked Multi Cal
The Bolt Hold Open Hole is threaded and comes with a bolt hold open screw, which allows for:
Easier installation, no more driving a roll pin just use a 1.5 hex wrench
Allows the user to remove the bolt hold open easily, handy when using a 9mm top down magazine adapter
COMES INSTALLED WITH:
Lower Parts Kit
Enchanced 6 Position Mil-Spec Diameter Stock With Recoil Pad
I will consider reasonable offers! I am more than happy to go test fire this gun with you at the range as long as I have cash in hand. Id like to get 700. I think thats a bargain for a free floated ar15
Last Edited:
