- Messages
- 828
- Reactions
- 48
Other than a brass tumbler and cartridge specific components (dies, brass, etc.), this is everything you need to get into reloading. Everything is in good condition unless noted otherwise, and I have probably loaded around 14K rounds with this setup.
-RCBS rock chucker IV press. The bolt for the priming ram is broke off in the press (I'll remove it if I can find a small enough EZ out), but the factory RCBS priming arms are garbage (I've had them break after priming only a few hundred cases) and you're better off just using the lee ram prime instead (which I've probably primed 10K or so cases with and have never had a problem).
-RCBS 5-0-5 scale
-RCBS uniflow powder measure
-RCBS universal loading block
-frankford arsenal digital caliper
-RCBS case lube pad, lube, and imperial sizing wax
-RCBS powder funnel
-Lee ram prime kit (for priming with the press)
-2 powder tricklers (RCBS, Lyman)
-RCBS large/small primer pocket cleaning tools
-RCBS chamfer/deburring tool
-6 RCBS shell holders (#18, 4, 6, 3, 7, 10)
-lee zip trim (doesn't work worth a crap)
-lee cutter w/ball grip
-lee adapter for trimming with a cordless drill
-3 jaw chuck for zip trim
-3 jaw spinner stud
-RCBS allen key set
-Lee case length gauges for the following calibers: .223, 7.62x25, 7.62x39, .44mag, 7.5 MAS, .30-06, 8mm mauser, .270, .308, .357mag, .38spl, 8x56R, .500S&Wmag, .300WinMag, .303 british, and 7mm mag
-the following manuals:
-lee modern reloading second edition
-hornady 7th edition
-speer #14
-lyman 49th edition
-sierra edition V 5th printing
-RCBS impact bullet puller
the following powder (approx. weights):
-3/4lb lil gun
-3/4lb H110
-1/2lb IMR4227
-1/2lb accurate 1680
-very small amounts of varget, universal, blue dot, power pistol, win 296, and H414
$300 for everything
price is firm
no parting anything out, selling as a package only
located in Dillard, OR (about 9 miles south of Roseburg)
the crappy bench/shelf goes with it if anyone wants it too
-RCBS rock chucker IV press. The bolt for the priming ram is broke off in the press (I'll remove it if I can find a small enough EZ out), but the factory RCBS priming arms are garbage (I've had them break after priming only a few hundred cases) and you're better off just using the lee ram prime instead (which I've probably primed 10K or so cases with and have never had a problem).
-RCBS 5-0-5 scale
-RCBS uniflow powder measure
-RCBS universal loading block
-frankford arsenal digital caliper
-RCBS case lube pad, lube, and imperial sizing wax
-RCBS powder funnel
-Lee ram prime kit (for priming with the press)
-2 powder tricklers (RCBS, Lyman)
-RCBS large/small primer pocket cleaning tools
-RCBS chamfer/deburring tool
-6 RCBS shell holders (#18, 4, 6, 3, 7, 10)
-lee zip trim (doesn't work worth a crap)
-lee cutter w/ball grip
-lee adapter for trimming with a cordless drill
-3 jaw chuck for zip trim
-3 jaw spinner stud
-RCBS allen key set
-Lee case length gauges for the following calibers: .223, 7.62x25, 7.62x39, .44mag, 7.5 MAS, .30-06, 8mm mauser, .270, .308, .357mag, .38spl, 8x56R, .500S&Wmag, .300WinMag, .303 british, and 7mm mag
-the following manuals:
-lee modern reloading second edition
-hornady 7th edition
-speer #14
-lyman 49th edition
-sierra edition V 5th printing
-RCBS impact bullet puller
the following powder (approx. weights):
-3/4lb lil gun
-3/4lb H110
-1/2lb IMR4227
-1/2lb accurate 1680
-very small amounts of varget, universal, blue dot, power pistol, win 296, and H414
$300 for everything
price is firm
no parting anything out, selling as a package only
located in Dillard, OR (about 9 miles south of Roseburg)
the crappy bench/shelf goes with it if anyone wants it too
Last edited by a moderator:
