9mm reloads 124 gr

[padraig]

Ad Type

1. For Sale

Price

$325

Manufacturer

Other / Not Listed

Caliber

9mm

City

Battle Ground

State

Washington

Zip Code

98604

1. I have read and accept the classified system rules and terms of service.

Over the last couple of years, I've loaded much more 9mm than I'm ever going to shoot. It's all good stuff but since I'm not a licensed manufacturer. I've got to sell it as components. Much of the brass is once fired, not all. I've used several powders, all labeled. I chrono'd most if the loads. About 70% are commercially coated alloy (Blue bullet, Bayou, Percision, Missouri, etc.), 30% are copper clad (Berry's, Xtreme). They're all tumbled clean and chamber checked.

I normally disassemble them in a Glock, Sig, Beretta, or S&W but I have to tell you in no uncertain terms that they must be pulled and used as individual components!

I put them in bags of 100 and will sell these as COMPONENTS to be disassembled for $325 per 1000. This is about the current cost of the unassembled components, if you can find them.

Please PM me with questions. If I'm doing something wrong here, let me know and I'll take down the ad immediately.

Read More

 

[Certaindeaf]

.This is about the current cost of the unassembled components, if you can find them..

But these are assembled and will require about 12 hours to disassemble with an inertia puller..

 

[padraig]

But these are assembled and will require about 12 hours to disassemble with an inertia puller..

12 hrs or much more! I figure you'll have to drive somewhere safe for disassembly, carefully load them into whatever magazine your tool may have, actual disassembly, cleaning your tool, bag up the components you may find (like brass), drive back home... Whew! What a day!