300wsm

[wsm]

has anyone found any good loadsfor a browning 300wsm a bolt tried accubonds , hornady,with large mag. primers and 72 grains of mag pro powder going to try berger bullets next thanks

Read More

 

[bockja]

My best loads as of right now in my browning a-bolt was a 165gr Hornady Interbond, with 68 gr of RL-17 using a federal large magnum primer. Accuracy at 100 yds has been sub moa with many groups hovering just over half inch (5 shot groups using a bipod and laying prone). I caution you however in using this load, be sure you follow the books and work up your own load.

 

[7mm08fan]

180 tsx barnes-68.5 -r19 215 fed mag match primer

 

[Greenbug]

A couple of good loads I used in my 300WSM before I sold it.

Nosler 150 Accubond 60.0 grains Hodgdon Varget CCI BR-2 primer.

Nosler 150 Accubond 71.0 grains Ramshot Hunter CCI BR-2 primer.