Diamond Supporter
- Messages
- 1,160
- Reactions
- 1,822
- Ad Type
- For Sale
- Price
- $650
- Manufacturer
- Taurus
- Caliber
- 357 Magnum
- City
- Hillsboro
- State
- Oregon
- Zip Code
- 97123
Downsizing calibers and getting rid of the only revolver I've ever really liked.
3" ported barrel, fully adjustable rear sight. 7 round cylinders. Comes with the .38 special/ .357 and the 9x19 cylinders. Two HKS speed loaders filled with Hornady American gunner 125gr .357's also are FOUR 9x19 factory full moon clips. They can come with Remington Golden Sabres. 124gr +P's for an extra $25.
Price for everything is $650 or $675 with the 9x19 Golden Sabres.
I have 317 loaded FULL POWER rounds, 125gr FMJ with either 21.0 gr of H110 or 11.0 grains of Shooters World Ultimate Pistol. Per the law and forum rules, these have to be sold as components and not shot. That being said I would not hesitate to let my wife or myself shoot any/all of them. They are a mix of brass and nickel case. $150
I also have 473 125gr TMJ .357 projectiles for $50
I also have .357 Lee dies (No Hornady bushings), a Hornady LNL shell plate, EGW case gauge and a home made 3D printed die holder $150
Buy it all and I'll cut $50 off, grand total $950
Nothing will be broken up until the revolver sells, then the remainder will be available via the appropriate sub forums.
Brandon
951 442 6918
3" ported barrel, fully adjustable rear sight. 7 round cylinders. Comes with the .38 special/ .357 and the 9x19 cylinders. Two HKS speed loaders filled with Hornady American gunner 125gr .357's also are FOUR 9x19 factory full moon clips. They can come with Remington Golden Sabres. 124gr +P's for an extra $25.
Price for everything is $650 or $675 with the 9x19 Golden Sabres.
I have 317 loaded FULL POWER rounds, 125gr FMJ with either 21.0 gr of H110 or 11.0 grains of Shooters World Ultimate Pistol. Per the law and forum rules, these have to be sold as components and not shot. That being said I would not hesitate to let my wife or myself shoot any/all of them. They are a mix of brass and nickel case. $150
I also have 473 125gr TMJ .357 projectiles for $50
I also have .357 Lee dies (No Hornady bushings), a Hornady LNL shell plate, EGW case gauge and a home made 3D printed die holder $150
Buy it all and I'll cut $50 off, grand total $950
Nothing will be broken up until the revolver sells, then the remainder will be available via the appropriate sub forums.
Brandon
951 442 6918
- I agree to the classified rules and terms of service