- Messages
- 980
- Reactions
- 2,605
I recently installed a Borebuddy extractor to replace the factory extractor in an Advantage Arms conversion slide. Here is a link to the product:
borebuddy.com
Not seeing any other installation instructions on the Web, I made up my own and posted them on Calguns at:
https://www.calguns.net/calgunforum/showthread.php?p=27975335#post27975335
I thought I would cross post them here in case anyone was interested.
Even after polishing up the internals on an AA conversion slide for a Glock 19 gen 3, I was still having FTE 2 - 20% of the time, which is annoying. So now, I have re-polished the chamber and added this new extractor. I will go to the range later this week and will comment on results after that time.
Power Extractor for Advantage Arms Glock Conversion
The BoreBuddy Hardened Power Extractor increases extraction reliability and reduces light strikes on the Glock advantage arms kits. Each package contains 1 extractor.
borebuddy.com
Not seeing any other installation instructions on the Web, I made up my own and posted them on Calguns at:
https://www.calguns.net/calgunforum/showthread.php?p=27975335#post27975335
I thought I would cross post them here in case anyone was interested.
Even after polishing up the internals on an AA conversion slide for a Glock 19 gen 3, I was still having FTE 2 - 20% of the time, which is annoying. So now, I have re-polished the chamber and added this new extractor. I will go to the range later this week and will comment on results after that time.
