Bronze Lifetime
- Messages
- 700
- Reactions
- 403
- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Olympia
- State
- Washington
- Zip Code
- 98506
Just not shooting jacketed bullets as I once did, & think that these should be moved along to somebody who will enjoy playing with swaging as much as I did.
These are heavy duty swaging presses & aren't designed for reloading. They weigh 25 lb each too, so shipping would be costly, at best. Willing to meet up within a reasonable distance if need be. Not selling the die sets separate until I get at least one of these gone. Would make somebody a nice package deal too, but like the man said in an old TV ad, it'll cost ya. Nice thing with a setup like this, never run out of bullets of whatever weight ya want. Richard Corbin retired last year, but still sells a few things on ebay & via email, & the Corbin company can sell you adapters for their dies should you want more. I believe BT Sniper will make sets for these too.
Presses come with one punch adapter, pin, & wedge for pushing out the finished piece.
$300 ea
Die sets for the above presses:
44 will make HPs, FPs, etc. Core seaters for copper jackets or 40 S&W cases (what I used :thumbsup2: ) $400
30 will make RNFP, open tip, SP, etc. Core seaters for copper jackets, 223 cases (I think, never tried), & 5.7 cases. $500
357/358 will make FPs, HPs, XTP style, etc. Core seaters for copper jackets & 9mm cases, 9mm jacket maker $500
316 lead swage die $50
Lots of jackets, annealed brass cases, lead wire of various sizes, kilns for annealing brass (or heat treating) too
Please PM me if you want anything.
These are heavy duty swaging presses & aren't designed for reloading. They weigh 25 lb each too, so shipping would be costly, at best. Willing to meet up within a reasonable distance if need be. Not selling the die sets separate until I get at least one of these gone. Would make somebody a nice package deal too, but like the man said in an old TV ad, it'll cost ya. Nice thing with a setup like this, never run out of bullets of whatever weight ya want. Richard Corbin retired last year, but still sells a few things on ebay & via email, & the Corbin company can sell you adapters for their dies should you want more. I believe BT Sniper will make sets for these too.
Presses come with one punch adapter, pin, & wedge for pushing out the finished piece.
$300 ea
Die sets for the above presses:
44 will make HPs, FPs, etc. Core seaters for copper jackets or 40 S&W cases (what I used :thumbsup2: ) $400
30 will make RNFP, open tip, SP, etc. Core seaters for copper jackets, 223 cases (I think, never tried), & 5.7 cases. $500
357/358 will make FPs, HPs, XTP style, etc. Core seaters for copper jackets & 9mm cases, 9mm jacket maker $500
316 lead swage die $50
Lots of jackets, annealed brass cases, lead wire of various sizes, kilns for annealing brass (or heat treating) too
Please PM me if you want anything.
- I agree to the classified rules and terms of service
Last edited by a moderator: