- Messages
- 82
- Reactions
- 55
- Ad Type
- For Sale
- Price
- $70
- Manufacturer
- Other / Not Listed
- City
- Portland
- State
- Oregon
- Zip Code
- 97221
I shot these in one match, but my pistol has a Steiner MPS and I needed lower sights. Like new condition. The fit was very tight in my gun, but I didn't need to do any filing or other modifications to the sights. Red fiber is installed. If I can find the green rod, I'll include it as well.
From Taran Tactical:
Made for double stack Glocks.
1/16 allen key.
Made to be co-compatible with optic cut slides in order to prevent removing iron sights with optic use.
RMR Co-Witness option is for Glock slides that have an RMR cut. This is not for MOS Glock slides.
POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo.
The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.
The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it - Which can cause the shooter to shoot either too high or too low.
The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.
Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.
As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.
The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.
All new punch inlay design on both sides of rear sight for better ease of installation and adjustment.
RMR CO-WITNESS HEIGHT SPECS (1/3RD CO-WITNESS)
The front sight is .315" tall and .124" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.
The rear is .317" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.
From Taran Tactical:
Made for double stack Glocks.
1/16 allen key.
Made to be co-compatible with optic cut slides in order to prevent removing iron sights with optic use.
RMR Co-Witness option is for Glock slides that have an RMR cut. This is not for MOS Glock slides.
POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo.
The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.
The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it - Which can cause the shooter to shoot either too high or too low.
The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.
Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.
As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.
The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.
All new punch inlay design on both sides of rear sight for better ease of installation and adjustment.
RMR CO-WITNESS HEIGHT SPECS (1/3RD CO-WITNESS)
The front sight is .315" tall and .124" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.
The rear is .317" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.
- I agree to the classified rules and terms of service
