Stainless triggers for P238's

[Partsproduction]

We make stainless triggers to replace the plastic triggers that come in Sig P238's, and am about to start a run of stainless and high strength aluminum alloy main spring housings to replace the plasticrap ones that come with the guns. The triggers also fit Colt Mustangs, Government .380's, and Pocketlites.

I'll post a notice when the MSH's are ready.

Triggers;
The cost is $40 for one stainless finish trigger, $50 for black finish
because I have to pay extra to have that done. If you are buying MORE than
one reduce the amount by $5 per trigger, I.E. $35 x 2 = $70 for two, or $35
for one stainless finish plus $45 for one black, etc.
The price includes shipping, so please don't add extra for shipping.

An important note! We spray an anti corrosive compound on the triggers that
must be removed, soak in gasoline away from flames or some other solvent
before assembly please. Yes the triggers are "stainless" but they sit in
storage
for long periods and we coat all products against corrosion before placing
in
storage.

Here is a video on installation;
Sigstainlesstriggerinstallation - YouTube

Contact me about payment.

Or you can send a money order to;

Tillamook Precision Inc.
7610 Trask River rd.
Tillamook, Oregon 97141

Read More

 

[cowboygraphics]

Good job on the video. Like that you showed recovering/adjusting to make it fit. The trigger looks great.

 

[RainMan_PNW]

Bookmarked and saved - I just may have to get one of these for my two-tone P238. Any idea when you'll have MSH available to go with it?

 

[Partsproduction]

Any idea when you'll have MSH available to go with it?

No, I haven't decided whether to make them myself or farm it out. I have a CNC mill but a true VMC would do it more efficiently, and I don't have one of those. Here is a photo of the prototype;

 

[bluecz97b]

These triggers are great! I ordered mine on monday and had them on tuesday! This is the black trigger, I polished the sides.

 

[RainMan_PNW]

Ordered mine Friday, got it Monday. Haven't had a chance to put it in yet though. Hopefully this weekend.

 

[RainMan_PNW]

Got this installed on Saturday night - took me about 20 minutes including watching the youtube video again to make sure I was doing things right. Super-simple tear-down and reassembly. I just took things gentle on removing the pin (gentle taps) and things came out just fine with no bubba marks on my frame or pin. I've got some Hogue G10 Black/Gray Piranha grips that should arrive today in the mail - I'll get some better photos once I've got those installed as well.

Before:


After: (I left the trigger au natural as I received it).

 

[Nate Gale]

We make stainless triggers to replace the plastic triggers that come in Sig P238's, and am about to start a run of stainless and high strength aluminum alloy main spring housings to replace the plasticrap ones that come with the guns. The triggers also fit Colt Mustangs, Government .380's, and Pocketlites.

I'll post a notice when the MSH's are ready.

Triggers;
The cost is $40 for one stainless finish trigger, $50 for black finish
because I have to pay extra to have that done. If you are buying MORE than
one reduce the amount by $5 per trigger, I.E. $35 x 2 = $70 for two, or $35
for one stainless finish plus $45 for one black, etc.
The price includes shipping, so please don't add extra for shipping.

An important note! We spray an anti corrosive compound on the triggers that
must be removed, soak in gasoline away from flames or some other solvent
before assembly please. Yes the triggers are "stainless" but they sit in
storage
for long periods and we coat all products against corrosion before placing
in
storage.

Here is a video on installation;
Sigstainlesstriggerinstallation - YouTube

Contact me about payment.

Or you can send a money order to;

Tillamook Precision Inc.
7610 Trask River rd.
Tillamook, Oregon 97141

Hi I just bought a P238. Do you still sell the stainless black triggers?