- Messages
- 85
- Reactions
- 33
For sale - One Marlin Camp 9 Carbine. Marlin's 9mm Luger blowback design in a short, handy carbine that's incredible fun to shoot. The carbine has been threaded for a suppressor, and includes a thread protecting cap. Thread pitch is 1/2 by 28. Includes scope, and three magazines: a factory ten round, as well as two Smith and Wesson Model 59 mags of 20 and 30 rounds each. (The Marlin was designed around the S&W model 59 magazine, so it takes those as well as factory). Sling is not included, but swivels are!
One small note: the prior owner did cut a very small (1cm by 1cm) and very shallow square out of the stock, just below the ejection port. He also made a similar, very mall cut to the receiver above it. This was to make room for a bolt stop (This would keep the bolt from moving, meaning that with a suppressor mounted, the gun was VERY quiet). The bolt stop has been removed, and the gun functions flawlessly. The cuts have ZERO effect on function, safety, or wear. In fact, if you want to instal a bolt stop, it's ready to go.
The receiver:
$600 $550 for everything above, including all 3 magazines. No trades, sorry.
I can meet in the Seattle/Tacoma/Olympia area. If you're interested, bring your WA ID. CPL preferred if you have it.
Thanks for looking!
One small note: the prior owner did cut a very small (1cm by 1cm) and very shallow square out of the stock, just below the ejection port. He also made a similar, very mall cut to the receiver above it. This was to make room for a bolt stop (This would keep the bolt from moving, meaning that with a suppressor mounted, the gun was VERY quiet). The bolt stop has been removed, and the gun functions flawlessly. The cuts have ZERO effect on function, safety, or wear. In fact, if you want to instal a bolt stop, it's ready to go.
The receiver:
$
I can meet in the Seattle/Tacoma/Olympia area. If you're interested, bring your WA ID. CPL preferred if you have it.
Thanks for looking!
