- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- City
- Oregon City
- State
- Oregon
$20 minimum purchase for meet up.
Please note if you buy any of my listed parts and you need something else to complete your build feel free to ask me I might have it I am not going to list every spare detent or spring or whatever it may be, but if you are meeting up to buy something and I have it I want to help you finish that special build and I will help out if I can.
5.56 Ar15 bolts complete bolt heads with extractor and ejector
New Spikes parked $65
Used Vg+ NiB Spikes $70
Use spikes parked $45
New Luth in package $48 (SOLD)
Magpul MOE Grip $20
BCMGUNFIGHTER™ KAG - KeyMod™ - Black $15 (SOLD)
BCMGUNFIGHTER™ Vertical Grip Mod 3-KeyMod™ - Black $15
Pistol Grip Screws $2 each (ALL GONE)
Extractors $10 each, inserts and springs $2 each with purchase of Extractor
Trigger guards $2 each (SOLD)
Bolt Catch $10 each (SOLD)
Mag Catch Assembly $12 each. (SOLD)
Norrell's bake on Moly Gray parts The whole set of visible parts $70 (SOLD)
Some extras paint Norrels Moly gray
Bolt Catch $20
trigger guards $7 each
Ejection port covers
2 had some printing on the inside that was painted over and still show through a little $12 each
the other had no printing $20
A2 Detachable carry handle sight bases stripped $10ea.
A2 Detachable carry handle index wheel $5ea.
Rear A1 A2 leaf springs $2ea.
A1 rear sight springs $1ea.
KAC Panels $10 each
FN FK marked A2 upper receiver no feed ramps Lots of finish ware but in VG condition $160
Complete flat top upper receiver. I don't remember who made it. It has an M4 above the gas port. Mounted but never fired $100
Colt CM marked A2 upper receivers stripped $160
Colored Grips $8 each
from left to right
Ghost Camel, Metallic Gold, OD Green, Green
A1 Flash hiders $10 each without washer $12 with the washer.
A1 Gas tubes $8 each
A1 Triangle Handguard caps $5 each
5.5" Vented flash hider $20
endplates regular ones $5 each
Receiver Extension Buffer Tube End Plate Ambidextrous Sling Loop $9
Magpul ASAP Receiver End Plate Sling Mount Adapter Ambidextrous $28
Delta Ring $10
Delta Ring assembly (Weld Spring, Snap Ring, and Delta Ring $15
Barrel nut if you need that too $10
Magpul and GG&G rail sling attachments $25 each
Lower Parts Kit put together with spare parts $60 (SOLD)
FN "FK" Marked A2 upper receiver Stripped finish is rough $145 (SOLD)
COLT factory fired only 6920 take out Bolt carrier group. Bolt marked "MPC" Carrier was lightly etched "C" kind of hard to see in photo at it's there since Colt has stopped marking carriers $200 (SOLD)
"PA" Marked A2 upper receivers used in greyish tint VG+ $220 (SOLD)
Early Colt Upper 604? Upper Receiver small front takedown pin not sight or dust cover assembly $240 (SOLD)
COLT A1 Upper receiver $200 (SOLD)
Colt Bolt Carrier C marked lots of use finish is gone but the carriers last just about forever $80 (SOLD)
Mil. Contract BCG "A" marked with date coded "MPZC" Colt Bolt $150 (SOLD)
Eagle Arms national Match A2 sight $60 with the purchase of one of my A2 upper receivers (SOLD)
Spikes Tactical Crusader Upper receiver Stripped $100 (SOLD)
Colt Cage Code M4 Stock $55 (SOLD)
Colt M16 Front Sight Bases In very used condition. They do include the sights. The rubber on sling attachment is toast. $30 each (SOLD)
Smith and Wesson M&P Sport Lightweight upper receiver $100 (SOLD)
Omega billet upper receiver, has been dremeled to fit a side charging bolt carrier $55 (TRADED)
New Ambi Safety $20 (SOLD)
Magpul AFG Pattern Dipped $15 (SOLD)
Stag Arms Flat Top upper receiver with Feed ramps $100 (SOLD)16" Spikes Tactical Chrome Hammer Forge Barrel stripped low rds 1/7 twist Midlength gas couple marks from set screw gas block. (TRADED)
Bushmaster M4 Carbine Style Upper 800rds fired 1/9 Twist Chrome lined 5.56nato In vg-ex condition No Bolt carrier group or charging handle $365 add a charging handle for $15 add a Spiked NiB Bolt carrier group $180 only with the purchase with complete upper (SOLD)
Please note if you buy any of my listed parts and you need something else to complete your build feel free to ask me I might have it I am not going to list every spare detent or spring or whatever it may be, but if you are meeting up to buy something and I have it I want to help you finish that special build and I will help out if I can.
5.56 Ar15 bolts complete bolt heads with extractor and ejector
New Spikes parked $65
Used Vg+ NiB Spikes $70
Use spikes parked $45
Magpul MOE Grip $20
BCMGUNFIGHTER™ Vertical Grip Mod 3-KeyMod™ - Black $15
Pistol Grip Screws $2 each (ALL GONE)
Extractors $10 each, inserts and springs $2 each with purchase of Extractor
Some extras paint Norrels Moly gray
trigger guards $7 each
Ejection port covers
2 had some printing on the inside that was painted over and still show through a little $12 each
the other had no printing $20
A2 Detachable carry handle sight bases stripped $10ea.
A2 Detachable carry handle index wheel $5ea.
Rear A1 A2 leaf springs $2ea.
A1 rear sight springs $1ea.
KAC Panels $10 each
FN FK marked A2 upper receiver no feed ramps Lots of finish ware but in VG condition $160
Complete flat top upper receiver. I don't remember who made it. It has an M4 above the gas port. Mounted but never fired $100
Colt CM marked A2 upper receivers stripped $160
Colored Grips $8 each
from left to right
Ghost Camel, Metallic Gold, OD Green, Green
A1 Flash hiders $10 each without washer $12 with the washer.
A1 Gas tubes $8 each
A1 Triangle Handguard caps $5 each
5.5" Vented flash hider $20
endplates regular ones $5 each
Receiver Extension Buffer Tube End Plate Ambidextrous Sling Loop $9
Magpul ASAP Receiver End Plate Sling Mount Adapter Ambidextrous $28
Delta Ring $10
Delta Ring assembly (Weld Spring, Snap Ring, and Delta Ring $15
Barrel nut if you need that too $10
Magpul and GG&G rail sling attachments $25 each
Last Edited:
