- Messages
- 786
- Reactions
- 735
- Ad Type
- For Sale
- Price
- $1300
- Manufacturer
- Other / Not Listed
- Caliber
- 7.62x39mm
- City
- Vancouver
- State
- Washington
- Zip Code
- 98661
To start off, I am selling off much of my firearms, parts, ammo, etc. I will be continuously uploading more items, as I go through everything. I am just mass posting much of my stuff, so if a price seems too high, please let me know and provide valid examples, and I will adjust my pricing accordingly (as I do with all my stuff for anyone who have seen my posts) . That being said, low ballers will be ignored. Again, if my price is too high provide reasonable evidence and examples, and I will adjust. Reason for selling is simple, less for me to move. I am seeking work out of the area and have a had some good opportunities pop up. So to get a head of things, I would like to start liquating stuff I don't need as I go through everything. As so, I am not moving it all, it's a mad dash to try to sell everything, or worse, let me wife handle selling it. Everything I am selling, is used unless otherwise noted. The firearms may or may not be clean, and most I purchased used then threw it in the safe, never fired it personally, so they may be dirty. I will try to clean and lube before sale. Everything has been stored in my climate control gun room, with a dehumidifer. As for ammo, they have been stored in the closet of that room, in ammo cans with dissect packs. Please do not message me and ask me about what I have, that I have not listed. I am continuously posting as I go through my stuff. No trades, as I am trying to get rid of stuff, not bring more stuff in.
Price: $1300
Location: Vancouver, WA
Willing to ship at buyer's expense, buyer pays all fees. etc
(NOT LEGAL TO TRANSFER TO WA RESIDENTS)
M+M Industries M10X, 300rds through it. Thing is BAD@$$ and shoots so smooth especially suppressed, but got to let it go due to reasons above.
Started life as a 16" barrel, The barrel's threads were not concentric to bore. Me suppressing EVERYTHING. I cut the barrel down to 13.9" and made a custom dual threaded sleeve to bring the threads to be concentric to bore (very AK like). Proceeded to install a Cobalt Kinetics RCB-KM keymo muzzle device on it and drilled through both the muzzle device and sleeve and installed a pin and welded it so it is legal and the sleeve would stay in the place as well.
List of mods:
Barrel cut down to 13.9"
Machine custom sleeve that threaded onto the barrel with a external thread of 5/8x24 that would correct the bore alignment issue
Cobalt Kinetics RCB-KM keymo muzzle device
Pin and welded sleeve/collar and muzzle device to 16"
Magpul AK MOE Grip (stock grip included)
1 30rd AK Pmag
Factory Magpul Zhukov stock w/ all 3 cheek riser sizes from Magpul in factory zip lock bags
Price: $1300
Location: Vancouver, WA
Willing to ship at buyer's expense, buyer pays all fees. etc
(NOT LEGAL TO TRANSFER TO WA RESIDENTS)
M+M Industries M10X, 300rds through it. Thing is BAD@$$ and shoots so smooth especially suppressed, but got to let it go due to reasons above.
Started life as a 16" barrel, The barrel's threads were not concentric to bore. Me suppressing EVERYTHING. I cut the barrel down to 13.9" and made a custom dual threaded sleeve to bring the threads to be concentric to bore (very AK like). Proceeded to install a Cobalt Kinetics RCB-KM keymo muzzle device on it and drilled through both the muzzle device and sleeve and installed a pin and welded it so it is legal and the sleeve would stay in the place as well.
List of mods:
Barrel cut down to 13.9"
Machine custom sleeve that threaded onto the barrel with a external thread of 5/8x24 that would correct the bore alignment issue
Cobalt Kinetics RCB-KM keymo muzzle device
Pin and welded sleeve/collar and muzzle device to 16"
Magpul AK MOE Grip (stock grip included)
1 30rd AK Pmag
Factory Magpul Zhukov stock w/ all 3 cheek riser sizes from Magpul in factory zip lock bags
Last Edited:
