Looking to build a Reloading kit

[Chase_Lee]

Ad Type

1. For Sale

Price

$1000

Manufacturer

Other / Not Listed

Caliber

9mm

City

Estacada

State

Oregon

Zip Code

97023

1. I have read and accept the classified system rules and terms of service.

Hey! I'm looking to start reloading and am just looking for things to get started, I will probably get a Dillion progressive but would be open to a Lee or Hornady and mainly be reloading 9 and 5.56. If you have anything collecting dust let me know!

Things I'm looking for
Progressive press
Tumbler
Dies (9mm, 556, 308, 6.5 creedMoor)
Ultrasonic cleaner
Powder scale
Shell holders

Read More

 

[4x401]

I would suggest starting with a single stage press. It's the best way to learn the fundamentals before moving to a progressive.

 

[SSloan]

Hey! I'm looking to start reloading and am just looking for things to get started, I will probably get a Dillion progressive but would be open to a Lee or Hornady and mainly be reloading 9 and 5.56. If you have anything collecting dust let me know!

Things I'm looking for
Progressive press
Tumbler
Dies (9mm, 556, 308, 6.5 creedMoor)
Ultrasonic cleaner
Powder scale
Shell holders

If you go single stage, I can help (w/new stuff) and consider trades.
+powders/primers/bullets/brass.
Steve

 

[Chase_Lee]

I would suggest starting with a single stage press. It's the best way to learn the fundamentals before moving to a progressive.

I used to reload a bunch years ago but I was thinking about maybe a single stage last night just because they are considerably cheaper

 

[Spitpatch]

I used to reload a bunch years ago but I was thinking about maybe a single stage last night just because they are considerably cheaper

More important than initial outlay of expense, as noted above, the best reason to start with a single stage press is to become fluent in the procedures and fundamentals of the reloading process.

This will be very valuable when/if you decide to go progressive, as troubleshooting will be simplified should a malfunction occur.

You will also learn details of the process that can contribute to the quality/accuracy of your ammunition. Some of these details can be overlooked when operating a progressive press. When you include these details in your procedures, you will be on your way to becoming a Handloader, viewing the activity as a science rather than a manufacturing process.

Complete single-stage reloading outfits come up regularly in the classifieds here for a small percentage of what they sell for new.

 

[Chase_Lee]

More important than initial outlay of expense, as noted above, the best reason to start with a single stage press is to become fluent in the procedures and fundamentals of the reloading process.

This will be very valuable when/if you decide to go progressive, as troubleshooting will be simplified should a malfunction occur.

You will also learn details of the process that can contribute to the quality/accuracy of your ammunition. Some of these details can be overlooked when operating a progressive press. When you include these details in your procedures, you will be on your way to becoming a Handloader, viewing the activity as a science rather than a manufacturing process.

Complete single-stage reloading outfits come up regularly in the classifieds here for a small percentage of what they sell for new.

That's good advice. I'll definitely take it highly into consideration thank you for your input

 

[Hemlock]

If you buy a readymade starter kit from one of the well-known mfgs, it will have everything you need to get started including a manual on the how to's.
It will be money well spent and may even be cheaper in the long run.

Reloading since the early 80's, the "happenings" on a single stage reloader can compound on a progressive. Until you get some experience.

 

[Spitpatch]

If you buy a readymade starter kit from one of the well-known mfgs, it will have everything you need to get started including a manual on the how to's.
It will be money well spent and may even be cheaper in the long run.

Reloading since the early 80's, the "happenings" on a single stage reloader can compound on a progressive. Until you get some experience.

Yep! first on your list should be a book. Not for the data, but for the narrative section on procedure and equipment. Manuals that are a few years old are VERY inexpensive. Get at least two from reputable outfits (Sierra, Lyman, Hornady, Speer, Nosler).

The book can help you determine essential equipment first, and then decide what "gadgets" and "upgrades" you might want.

 

[Peteralexander78]

My vote is for a turret press. Like a single stage where you control the process but you have all the dies set up and can load faster. I started with one and learned on my own. Been using a Lee classic turret press for 18 years now.

 

[Peteralexander78]

Plus it's a lot cheaper initial cost compared to a progressive

 

[Chase_Lee]

My vote is for a turret press. Like a single stage where you control the process but you have all the dies set up and can load faster. I started with one and learned on my own. Been using a Lee classic turret press for 18 years now.

I've been actually watching videos all day on them. I think you might be right

 

[Peteralexander78]

https://www.northwestfirearms.com/t...ng-press-complete-excellent-condition.522733/
I like my Lee but it only has 4 die spots. RCBS has a bit more robust one. Member here has one for sale.