- Messages
- 4,277
- Reactions
- 10,737
- Ad Type
- For Sale
- Price
- $60
- Manufacturer
- Gerber
- City
- Harrisburg
- State
- Oregon
- Zip Code
- 97446
Only one left.
Gerber made these from 1990-1998 from 440C stainless steel. Manufactured in Portland. To me, this is the perfect knife for elk, and not too big for deer. I carry two in my hunting pack.
Here's some detail I found on a search:
"Gerber Pro Guide Series 950 Clip point blade. Gerber 950 ProGuide Series Clip Point Hunter Knife with 4 7/8" Blade & Sheath. These knives were made from 1990-1998 by Gerber in Portland, Oregon. This single plain edge clip point blade has a matte finish 440C stainless steel blade with narrow bright edge bevels measuring 4 7/8 inches in length. An arced finger rest is provided for a more forward grip and the bladed is slightly canted edge-ward. The blade markings are on the ricasso, reading 'GERBER; 950' on one side and 'PORTLAND, OR; USA' on the other. The full tang has textured black glass filled nylon grip scales secured by three pins and features a forward finger rest and a rear lanyard hole. The knife is 9¾ inches long and weighs 6 ounces. The knife comes with a black Cordura nylon sheath with a folded back belt loop and has a snap closing retention strap wrapping around the finger rest to snugly hold the knife. A tag stitched to the sheath reads 'GERBER; LEGENDARY BLADES' interspersed around a sword in stone logo with 'MADE IN U.S.A.' below. Sheathed, overall length is 10¾ inches with a weight of 7.8 ounces."
This knife looks to have been sharpened but it doesn't look used.
Snap on the sheath is tight. And no, it wasn't stored in the sheath.
$60 shipped
P
Gerber made these from 1990-1998 from 440C stainless steel. Manufactured in Portland. To me, this is the perfect knife for elk, and not too big for deer. I carry two in my hunting pack.
Here's some detail I found on a search:
"Gerber Pro Guide Series 950 Clip point blade. Gerber 950 ProGuide Series Clip Point Hunter Knife with 4 7/8" Blade & Sheath. These knives were made from 1990-1998 by Gerber in Portland, Oregon. This single plain edge clip point blade has a matte finish 440C stainless steel blade with narrow bright edge bevels measuring 4 7/8 inches in length. An arced finger rest is provided for a more forward grip and the bladed is slightly canted edge-ward. The blade markings are on the ricasso, reading 'GERBER; 950' on one side and 'PORTLAND, OR; USA' on the other. The full tang has textured black glass filled nylon grip scales secured by three pins and features a forward finger rest and a rear lanyard hole. The knife is 9¾ inches long and weighs 6 ounces. The knife comes with a black Cordura nylon sheath with a folded back belt loop and has a snap closing retention strap wrapping around the finger rest to snugly hold the knife. A tag stitched to the sheath reads 'GERBER; LEGENDARY BLADES' interspersed around a sword in stone logo with 'MADE IN U.S.A.' below. Sheathed, overall length is 10¾ inches with a weight of 7.8 ounces."
This knife looks to have been sharpened but it doesn't look used.
Snap on the sheath is tight. And no, it wasn't stored in the sheath.
$60 shipped
P
