Cetme C flat bending jig sourcing

[doc1776]

Does anyone know of anyone still carrying the cetme C flat bending jig aside from hkparts.net for a whopping $600? Please let me know. I know people have made their own diy but I really don't have the faith in myself to carryout a mission like that. Thanks in advance!

Read More

 

[Val1884]

Unistrut and 20mm rod.

 

[doc1776]

Unistrut and 20mm rod.

Thanks fort your reply Val, Where would I acquire a strut and how long do each component have to be?

 

[doc1776]

Thanks fort your reply Val, Where would I acquire a strut and how long do each component have to be?

Unistrut I mean

 

[Val1884]

I'll get the measurements today. It's around 50$ in material an 20 mins to build.

 

[doc1776]

I'll get the measurements today. It's around 50$ in material an 20 mins to build.

Sweet, thanks Val! I appreciated your time and dedication.

 

[Val1884]

https://www.mcmaster.com/3310T58 Order 2 ft

20mm Shaft 32

We don't Offer International Shipping Chrome Plated 32 Inch Length 20mm Diameter Shaft 20mm Shaft 32

www.vxb.com

Then order that...Once the stuff arrives you simply cut it size..And weld the unistrut..its galvanized so wear appropriate safety equipment. This is what it should look like when done.

 

[doc1776]

Hey Val, thanks for the info. I didn't get the video links though...

 

[Val1884]

What video links? I just put in the links for materials

 

[doc1776]

Oh ok, thanks. I thought you had mentioned something about video links. My fault

 

[Val1884]

Its best if you mill a flat into the rod so you can press the flat evenly. Youll need to make your own timing marks for straightness.

 

[Provincial]

This ad still seems to be active:

https://www.northwestfirearms.com/threads/g3-cetme-flat-bending-jigs.401483/

 

[It-That]

This ad still seems to be active:

https://www.northwestfirearms.com/threads/g3-cetme-flat-bending-jigs.401483/

It's my ad, I actually took tomorrow off so I can calibrate my printers and finish a few up.

 

[Provincial]

It's my ad, I actually took tomorrow off so I can calibrate my printers and finish a few up.

 

[It-That]

I'm back and I have one ready to ship now. Sorry for not getting back to you guys, I've been dealing with some health issues.

 

[Joker18776]

How can i purchase the Cetme C jig

 

[It-That]

I just finished another, I'll message you now.

 

[JTK1791]

CETME and HK flat bending jig by Tankoj

This is a printable bending jig for CETME and G3 receiver flats to both bend the flat evenly, and keep it properly shaped. It should work on all HK style flats, but I don't have any others on hand to test. The "Mandrel Filler" pieces should be installed once the flat is most of the way there...

www.thingiverse.com

HK G3 Welding Alignment Jig Remix by nightstryke1

I've included NTBayerische's original text on this remix, but there was a flaw with piece 7-1 and piece 6 of which a screw in the piece obstructed 1/2" rod/dowels from going through the object. Some additional tips/references, Tractor Supply sells 1/2" x 36" steel rod in the welding aisle, I...

www.thingiverse.com

Found these on thingiverse if you have access to a 3D printer

 

[QuickDrawMGraw]

I just finished another, I'll message you now.

Are you still building these Jigs for the Cetme C ? If so id like to get one Please, Jim

 

[Hpdrifter]

Does anyone have the plans or build guide for the uni strut jig?