- Messages
- 1,101
- Reactions
- 2,081
- Ad Type
- For Sale
- Price
- $300
- Manufacturer
- Other / Not Listed
- Caliber
- 45 ACP
- City
- Beaverton
- State
- Oregon
- Zip Code
- 97078
I have another project in the works and this has to go. It shot extremely well and was very accurate, I just did not shoot it much. I might have put 500 rounds through it between the two barrels. Included are the Side Charging Upper and Lower Receivers, 16" and 8" barrels and 45ACP specific Bolt and X-Heavy Buffer. Runs on Glock Mags. I am looking to get $300 for the whole setup, cash money at Cut Above Pawn or Aloha Arms.
The Lower is from Joe Bob's and the Upper is from New Frontier. Both were manufactured by Gibbz. The lower includes the ejector, bolt catch and mag release. The Green 45ACP is a vinyl sticker.
The upper includes the Last Round Hold Open and Latching Charging Handle (gen 3).
Barrels, Bolt and Buffer were also purchased from New Frontier. I did a little polishing on the "feed ramp" of the 16" barrel due to a feeding issue when it was new. Problem turned out to be the extended mag release that I had installed so I took it off. I put the original back on and the 16" runs perfect.
Let me know if you have any questions.
