.338 Muzzle brake recommendation

[joken]

I need a muzzle brake for a .338 Lapua in 5/8x24. Any suggestions?
I found an adapter from 5/8x24 to 1/2x28, is there any reason not to use it and go to a 1/2x28 Brake? It looks like a 3/4" thread is what is commonly used for .338 these days.

Read More

 

[Camelfilter]

1/2x28 is normally used on small bore (bellow .30 cal), 5/8x24 on large bore (above .30 cal).

Should be reasonably easy to find a brake threaded correctly without any adapters.

(No recommendations, sorry, don't own a .338)

 

[joken]

1/2x28 is normally used on small bore (bellow .30 cal), 5/8x24 on large bore (above .30 cal).

Should be reasonably easy to find a brake threaded correctly without any adapters.

(No recommendations, sorry, don't own a .338)

I found some, thanks

 

[P7M13]

Muzzle brakes and More (MBM)
I have several of Nathan Wright's brakes. Outstanding values, and very quiet (for a brake).
On my 338 Edge, ballistic twin to the 338 LM, I have a 5 vane ported (vents at 12 o'clock) brake.

 

[joken]

Muzzle brakes and More (MBM)
I have several of Nathan Wright's brakes. Outstanding values, and very quiet (for a brake).
On my 338 Edge, ballistic twin to the 338 LM, I have a 5 vane ported (vents at 12 o'clock) brake.

Thanks, I'll give them a look.

 

[kanak-attack]

you could order a AM338 it does come with a 338 brake and bonus suppressor

 

[fredball]

Buy a 5 port and you can thank me later

 

[Steel Head]

MBM and area419 sidewinder are both really effective on 338's
5/8 tenon at a minimum
I run 3/4 tenon on mine.

 

[HPL0]

I have a TI Pro on a 300 NMI and I was very impressed with the recoil reduction! This was on a 15 lb rifle but it still thumped far less than expected.

 

[Olderguy]

I have a custom 338 that was maga ported. Very ,very impressive in recoil reduction. Also one of my most accurate rifles, although probably noy due to magna porting.