.25-06 brass

[ironmule]

Wanted Ad Type

1. Want to Buy

Manufacturer

Other / Not Listed

Caliber

Other / Not Listed

City

Sequim

State

Washington

1. I have read and accept the classified system rules and terms of service.

Looking for some 1x fired
25-06 brass.
Thanks.

Read More

 

[thorborg]

Just a thought if you cant find enough of what you need;
30-06 and .270 brass work well if your willing and able to fiddle a little, some may need to trim and possibly ream neck thickness when your sizing down, as needed, depending on the parent case used. Some object to the head stamp possible confusion, Since I don't sell my stuff, no issue for me. Instead of altering the existing stamp, I used fingernail polish of different colors for different reworked calibers on the head to identify the few reconstructs I've done on various calibers. And of course well labeled boxes.
Basically I try to keep cost down as low as possible when there is little to compromise or go wrong. I find carbide dies work better when altering brass radically but your situation won't be a problem.

 

[ironmule]

Just a thought if you cant find enough of what you need;
30-06 and .270 brass work well if your willing and able to fiddle a little, some may need to trim and possibly ream neck thickness when your sizing down, as needed, depending on the parent case used. Some object to the head stamp possible confusion, Since I don't sell my stuff, no issue for me. Instead of altering the existing stamp, I used fingernail polish of different colors for different reworked calibers on the head to identify the few reconstructs I've done on various calibers. And of course well labeled boxes.
Basically I try to keep cost down as low as possible when there is little to compromise or go wrong. I find carbide dies work better when altering brass radically but your situation won't be a problem.

Thanks for your reply . I have an itch to try the 6.5-06. Found one at auction back east. Built off sako l691.....so I have the dies thought I'd try to size some up.I have 30-06 brass. I will do the fingernail trick. Thanks.Harrison.

 

[shad71]

How many are you looking for?

 

[ironmule]

50 or so going to fireform to 6.5-06

 

[shad71]

50 or so going to fireform to 6.5-06

I'll dig through my stash and see what I have. You'll like the 6.5-06 it's a great cartridge that's underrated IMHO

 

[ironmule]

Thanks I bought it at an internet auction .
I hope it's a good one....will be here next week.

 

[LevergunNut72]

I have some brass if you still need some.

 

[ironmule]

Brass has been purchased.