Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
suppressor cover
A silencer, also known as a sound suppressor, suppressor or sound moderator, is a muzzle device that reduces the acoustic intensity of the muzzle report (sound of a gunshot) and the recoil when a gun (firearm or air gun) is discharged, by modulating the speed and pressure of the propellant gas from the muzzle and hence suppressing the muzzle blast. Like other muzzle devices, a silencer can be a detachable accessory mounted to the muzzle, or an integral part of the barrel.
A typical silencer is a metallic (usually stainless steel or titanium) cylinder containing internal sound baffles, with a hollow bore to allow the projectile (bullet) to exit normally. During firing, the bullet flies through the bore with little hindrance, but most of the expanding gas ejecta behind it is retained through a longer and convoluted escape path created by the baffles, prolonging the release time. This slows down the gas and dissipates its kinetic energy into a larger surface area, reducing the blast intensity, thus lowering the loudness.Silencers can also reduce the recoil during shooting, but unlike a muzzle brake or a recoil compensator, which reduce recoil by vectoring the muzzle blast sideways, silencers release almost all the gases towards the front. However, the internal baffles significantly prolong the time of the gas release and therefore decrease the rearward thrust generated — as for the same impulse, force is inversely proportional to time. The weight of the silencer itself and the leverage of its mounting location (at the far front end of the barrel) will also help counter muzzle rise.
Because the internal baffles will slow and cool the released gas, silencers also eliminate the muzzle flash. This is different from a flash suppressor, which reduces the amount of flash by dispersing burning gases that are already released outside the muzzle, without necessarily reducing sound or recoil. A muzzle shroud, on the other hand, conceals visible flashes by screening them from the direct line of sight, rather than reducing the intensity of the flash.
NEW NEVER USED BPG Suppressor Cover Heavy - Black, 8"
Was going to be for a Wolfman but went a different route.
One of the best covers you can get for your suppressor!
Bypass the wait time from BPG
$SOLD
SOLD
Bought this and installed it but ended up getting a burnproof gear cover from a friend so I no longer need this cover. The Magpul suppressor cover is designed specifically for the Surefire RC2 but works with any can that’s over 5.5”. I tried it on an AAC 762SDN-6, which had about half inch...
Selling a like new Liberty’s Defense Suppressor Cover. Made for the 5.56 Surefire RC2.
Cover has been installed but never fired and is in perfect condition. Rated for continuous fire up to 2,000 degrees Fahrenheit and short bursts at 3,000 Fahrenheit. This is the best suppressor cover on the...