Bronze Lifetime
- Messages
- 11,501
- Reactions
- 26,441
Thanks, have wanted to do the exact same thing. Now for the cash.....Both individual to manufacture.
Used Silencershops service to do all paperwork and submit etc.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks, have wanted to do the exact same thing. Now for the cash.....Both individual to manufacture.
Used Silencershops service to do all paperwork and submit etc.
.30 cal one is not done.
Total cost including stamp:$485
9 baffles, all stainless (may swap some with aluminum before drilling and discard remainder).
Weight: 28oz.
View attachment 478820
Stamps yes, builds not completed yet!
Actually, I have every thing made, just need to fit it all together for each unit, making adjustments as needed! The ATF inspection happens after completion, and that happens just before my year runs out, 10 months from now! So, I got some time!
For those looking to go this route, make sure you ether know the type of system your going to run, or have enough time to design and test it out, once your done, your done! The ATF agent I delt with last time was super cool to deal with, and he signed off with out any problems!
Actually, I have every thing made, just need to fit it all together for each unit, making adjustments as needed! The ATF inspection happens after completion, and that happens just before my year runs out, 10 months from now! So, I got some time!
For those looking to go this route, make sure you ether know the type of system your going to run, or have enough time to design and test it out, once your done, your done! The ATF agent I delt with last time was super cool to deal with, and he signed off with out any problems!
@Dyjital did you use manufactured parts? I know there are places out there selling parts that you can purchase once you have received your stamps.
They do inspect, and it can be random at any time, its happend! How do you think they insure compliance? If they didn't, you could change and adjust every day and they wouldn't ever know, RIGHT, so they inspect! If you havnt been inspected, lucky you!
This is where Negative Nancy comes in and says it is not legal to build more baffles and replace the ones you have already built even if you do not like them .
Public service announcement over.
As he IS the manufacturer, I see no reason he can't repair and upgrade the can later on just like any manufacturer already does. Do you have a specificly reference law or directive from BATFE that says he can't every repair or upgrade it?