Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Like it says an Uberti '58 made in 2017 with an antique finish. Has had 6 shots through
the cap and ball cylinder and every other shot has been with light cowboy loads in the
.Colt conversion cylinder. This is one very accurate shooter as can be seen in a couple
pics i posted of 20yd groups...
Great condition, only a couple boxes of ammo though it. It's been sitting in the safe for a couple years, so I figured it was time to move it on. $700 for the gun and conversion slide, $30/each extra mag.
This is a somewhat rare CMMG .22lr barrel with a pinned FSB. They don't make them anymore and they are not easy to come by. This one is in perfect condition with only 400-500 rounds down range. It's been 100% reliable and a fun plinker.
CMMG barrel
RTB BCG
Bushmaster upper receiver
UTG rear...
I have the two parts needed to convert your Beretta CX4-PX series into a CX4-90 series. These parts work for both 9mm and .40cal. I would like to trade you for your PX4 series parts. It is an easy switch, I have done mine and can stitch yours if you do not feel comfortable. It’s just a matter of...
I know this is a long shot, but looking to see if anyone might have one collecting dust somewhere. They've been discontinued for a while now.
RCBS Pro 2000 auto indexing conversion.
More than happy to pay actual shipping cost plus the cost of the conversion kit.
Dillon 550C - only a couple months old and less than 100 rounds total through it. I own 3 other Dillon 750's/550's and this was a 4th that I was going to set up for just couple different cartridges, but I have now purchased an Area 419 Zero press and no longer need it. I am selling the Press...
These are unobtainium it seems so don't miss out on this hard to find little kit. What you see is what you get!
Factory Walther 5" target barrel. This has the rail cuts on the bottom so I beleive this is for the newer P22Q version. The bore is bright. Sharp edges on barrel weight show finish...
Cmmg 22lr BCG used 300 rounds through it
3 black dog mags 1 new 2 used
Speed loader with ar22 adapter and 2 10/22 adapter
3 new firing pin, 2 new extractor and 1 new taccom recoil spring
Taccom pressure plug
Taccom plastic collar made for taccom barrels. Collar not made to fit on cmmg...
The silver one has a extractor assembly I do have spare extractors but no extra roll pins or
springs. $35
The black one is completely stripped. $15
Might be good to have a spares will work with cmmg parts other than noted.
Please note CMMG extractors will work for these but the firing pins...
WTS/WTT
LBT 8026a
Ranger green
New condition
Fanny pack that can be worn on h harness as a chest rig
$250
Cash, Venmo zelle
Trade value $326
Trade for
Reloading components… 5.56, 308, 9mm
Other soft gear in ranger green or m81
Knives
Ammo
Gun stuff
fired about 150 rounds, and decided that the subcompact life just simply isn't for me
comes with both original factory, 10 round mags, holosun EPS carry in green dot with original box, all three functional shield, arms mags, and I have already installed the shield, arms magazine release...
Instead buying an overpriced river Blackhawk conversion, I bought a cylinder and can now shoot 9mm from my .38/.357mag revolver.
I was going to get a spare cylinder for my S&W 27 but it was $70 and $350 to have it converted to 9mm. This ruger route was $100 shipped to my door.
I have an Uberti 1858 Remington with the antique finish that also has a .45 LC conversion cylinder
and a nice custom made cross draw holster. Gun is very accurate, especially with the .45 Colt cylinder
with the brass loaded with .454 round balls. Also does good with 200, 228, and 252gr...
This is from my brother's estate. It's the Target Model which sells for $350. It appears to have been used very little. It's missing the magazine (easily obtainable from Advantage Arms) but has the padded carry case. I'll let it go for $200.
Possible trade for quality 5.7x28 ammo.
OEM Glock 17 Gen 4 slide and barrel. All internals are stripped. Will include the OEM barrel, channel liner, and Ameriglo iron sights.
Will also work on a on Glock G22 Gen 4 frame. If you wanted to be able to swap over from .40cal to 9mm and avoid a conversion barrel (which alone costs...