- Messages
- 5,162
- Reactions
- 8,865
- Ad Type
- For Sale
- For Trade
- Price
- $700
- Manufacturer
- Smith & Wesson
- Caliber
- 9mm
- City
- Beaverton
- State
- Oregon
Found a S&W Shield so changing this to a WTT ad
WA friendly, either meet in Vancouver or ship on your dime
Things I'm looking for in trade (or trade + cash)might be:
22 Hornet ammo
Hi Point 45acp (High Tower Bullpup conversion a plus!)
EAA Witness small frame 'full size' 9mm or 40S&W
EAA Witness 'full size' 45acp
RIA 22TCM rifle (sporter or tac version)
Traditions Outfitter G3 in 357mag
16" 350 Legend barrel and bolt (don't need the upper)
16" LW 223 barrel and upper (don't need the bolt)
S&W Shield 40S&W mags
Savage 340 30-30 Win
32 ACP ammo
I'll add to the list as I think of things
OK, technically the Roland Special is built on a Glock, but this one points in the right direction, so . . .
Like the Buckmark I listed, new purchase have to be paid for by selling something, so it's time for this one to go down the road. I built this up with the intent of using it as a CCW piece but it has only been a range toy. Round count more than 500 but less than 1,000. The Faxon threaded barrel is drop in and after the first couple rounds it ran flawlessly for +/- 50 rounds
Package includes;
M&P 2.0 4" Compact w/factory plastic case
Slide milled for Holosun HS507C red dot (included) by Floyds Custom Shop with forward mounted Suppressor height sights. The forward mount on the rear sight gives extra protection for the red dot if you need to cycle the slide one handed
I just replaced the battery and the had to get a new tool and plate cover from Holosun because sometimes I'm dumb
The front sight has some green poster paint on it, if you hate it I can take it off
Red dot cut cover plate should you have need to run the gun with the sight removed
Faxon extended and threaded barrel
2 - factory flush fit 15 round magazines
2 - factory extended (with spacers) 17 round magazines
3 - ETS 21 round magazines, 2 of them unused
1 - ETS 30 round magazine (tested and works fine)
No name IWB holster that I cut the front down a bit to fit the sight placement. I used this at the range and around the house trying it out, but never carried this 'in real life'
The holster is not cut for a light
The Olight PL-2 Valkyrie is optional and no ammo is included, I was just too lazy to unload the mags
Asking$800.00 NOW $700.00! for the package, add $50.00 if you would like the Olight. Not really interested in trades but feel free to hit me up if you think you have something worth talking about (Glocks, shotguns, hunting rifles and most AR's need not apply)
Also, if you think I'm a bit high on my price feel free to PM me with what you think is fair, but fair warning, I think I'm about in the sweet spot on this one
I like A Cut Above Pawn, but work takes me all over town so we may be able to work around an FFL of your choice.
And we all know threads are useless without photos, so here ya' go!
WA friendly, either meet in Vancouver or ship on your dime
Things I'm looking for in trade (or trade + cash)might be:
22 Hornet ammo
Hi Point 45acp (High Tower Bullpup conversion a plus!)
EAA Witness small frame 'full size' 9mm or 40S&W
EAA Witness 'full size' 45acp
RIA 22TCM rifle (sporter or tac version)
Traditions Outfitter G3 in 357mag
16" 350 Legend barrel and bolt (don't need the upper)
16" LW 223 barrel and upper (don't need the bolt)
S&W Shield 40S&W mags
Savage 340 30-30 Win
32 ACP ammo
I'll add to the list as I think of things
OK, technically the Roland Special is built on a Glock, but this one points in the right direction, so . . .
Like the Buckmark I listed, new purchase have to be paid for by selling something, so it's time for this one to go down the road. I built this up with the intent of using it as a CCW piece but it has only been a range toy. Round count more than 500 but less than 1,000. The Faxon threaded barrel is drop in and after the first couple rounds it ran flawlessly for +/- 50 rounds
Package includes;
M&P 2.0 4" Compact w/factory plastic case
Slide milled for Holosun HS507C red dot (included) by Floyds Custom Shop with forward mounted Suppressor height sights. The forward mount on the rear sight gives extra protection for the red dot if you need to cycle the slide one handed
I just replaced the battery and the had to get a new tool and plate cover from Holosun because sometimes I'm dumb
The front sight has some green poster paint on it, if you hate it I can take it off
Red dot cut cover plate should you have need to run the gun with the sight removed
Faxon extended and threaded barrel
2 - factory flush fit 15 round magazines
2 - factory extended (with spacers) 17 round magazines
3 - ETS 21 round magazines, 2 of them unused
1 - ETS 30 round magazine (tested and works fine)
No name IWB holster that I cut the front down a bit to fit the sight placement. I used this at the range and around the house trying it out, but never carried this 'in real life'
The holster is not cut for a light
The Olight PL-2 Valkyrie is optional and no ammo is included, I was just too lazy to unload the mags
Asking
Also, if you think I'm a bit high on my price feel free to PM me with what you think is fair, but fair warning, I think I'm about in the sweet spot on this one
I like A Cut Above Pawn, but work takes me all over town so we may be able to work around an FFL of your choice.
And we all know threads are useless without photos, so here ya' go!
- I agree to the classified rules and terms of service
Last Edited: