Gold Supporter
- Messages
- 25,009
- Reactions
- 38,016
I realize you would end up with a relatively short neck on the fire formed brass. But would it have enough neck tension to hold the projectile for manually feeding each cartridge into the chamber? I have seen photos of the brass after firing a 300 Win Mag cartridge in a 300WBY chamber and it often results in split shoulders. My thought is that by fire forming it with cream of wheat style loads and freshly annealed necks that it might help prevent the split shoulders?
Worky:
No worky:
Worky:
No worky:
Last Edited: