- Messages
- 503
- Reactions
- 234
- Ad Type
- For Sale
- Price
- $4000
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Cave Junction
- State
- Oregon
- Zip Code
- 97523
Greetings, MAJOR price Drop!
This is a ridiculously low price if you were to add up the separate parts. The scope alone is worth $1,500 used and that's from the S&B guy that checked it out for me.
*AXTS AX-556 A-DAC #30* Lower in exquisite condition *****WITH*****
*Timney 3# Curved Skeletonized Trigger;
*SSI Strike Switch Safety switch;
*Seekins Precision IRMT-3 Upper
*Matched Seekins Precision; SP3RV-3 15" Handguard w/ M-LOK Rail;
*18" Proof Research SS Carbon Fiber .223 Wylde w/1:8, .750 Gas Journal;
*SilencerCo ASR QD Muzzle Break;
*Rifle Length DI w/ .750 Superlative Arms "Bleed Off" Adjustable Gas Block (The gas to cycle, eject makes the trip AFTER achieving locked battery);
*LMT Enhanced Gas Tube w/H2 gas block;
*Lantac NIB Enhanced Bolt Carrier Group (E-BCG);
*Atlas PSR 46 17 Bipod, (non rotating) w/std rubber feet;
*Hawk Hill Talon Bipod feet;
*Troy Micro 45° Battle Sights;
*Stream light ProTac light w/Pressure Pad Activation;
*LMT DMR Butt stock;
* Magpul CTR Butt Stock w/ GG&G Cheek Weld Riser;
*US Optics Dayglow Yellow Level w/tube rail protector cover;
* Magpul 1&2 Point Adjustable Battle Sling;
*Atlas Mono Pod w/Yankee Hill Mount;
*Magpul Rubber Overcoat Grip;
*****with*****
*Schmidt & Bender 3-12 x 50 PM-II IL Classic w/S&B Factory Installation ART Reticle (Darrel Holland Design w/ Sun Shade and Sphur Rt Angle Set Tool. Holland "Blank" Dope Card Set, CD for Designing Personal Dope Cards and instructions/Lessons to properly use the, arguably fastest/most accurate ranging/sizing Reticle Available!!!! Sitting Atop A,
*Spuhr 3016 0° MOA Cantilever Scope Mount w/rear mounted White Level;
*Goldie Locks "Just Right" Headspace tolerance check Including the 5.56 Headspace measurement gauge used....sweet, sweet proof!;
* Pelican FDE 1720 Hard Case-case looks 80%, works 100%
The Scope was purchased used f/ NWF and sent to Darrel Holland (long-range master teacher and engineer) wherein he forwarded it on to S&B where it received an Alls Great Passing Grade!
The AXTS A-DAC Lower was purchased used but was/is in excellent condition. I was told that it was originally purchased by a well known "Thunder Ranch" Member, and was surrounded by Noveske Equipment; I was owner No. 2.
The rifle was shot 1) to break-in the Barrel, 6 shots; and 2) SA Gas Block Adjustment (time in battery and smooth cycling) & Get it on Paper w/ follow-up Consistency, 6 shots- 12 total using XM 193 & XM 855 respectively. Please let me know if you have any questions, etc. I'm in Cave Junction, but willing to ship. I've previously shipped a Nemo 308 w/o any issues or heartache!
Understanding no one wants to hear there's $7k invested $4,000
It was a patience tested 3+ years to piece together and the end result was/is worth it.
Over the last 5-8 years I've chipped away from a small collection and I'm, for the most part, whittled away to that which would be used if necessary, but age and the sordid side effects therein are out pacing the passion (s).
Thank you for your time and no, she doesn't have a name yet....
Please understand that I'm not looking for any trades, well I might take an LM or FMTV!!!!
Price is always negotiable but I'm not having a fire sale. Please respect her lineage and just barely legal age. The time taken to research and acquire parts wasn't anything anything short of a labor of love. Her Mom is a bit overweight LMT MWS 16" SS that has confirmed many times that I'm the only weak link; that was the bar I was going for. Please chance offer(s), but serious only please.
Thanks again!
This is a ridiculously low price if you were to add up the separate parts. The scope alone is worth $1,500 used and that's from the S&B guy that checked it out for me.
*AXTS AX-556 A-DAC #30* Lower in exquisite condition *****WITH*****
*Timney 3# Curved Skeletonized Trigger;
*SSI Strike Switch Safety switch;
*Seekins Precision IRMT-3 Upper
*Matched Seekins Precision; SP3RV-3 15" Handguard w/ M-LOK Rail;
*18" Proof Research SS Carbon Fiber .223 Wylde w/1:8, .750 Gas Journal;
*SilencerCo ASR QD Muzzle Break;
*Rifle Length DI w/ .750 Superlative Arms "Bleed Off" Adjustable Gas Block (The gas to cycle, eject makes the trip AFTER achieving locked battery);
*LMT Enhanced Gas Tube w/H2 gas block;
*Lantac NIB Enhanced Bolt Carrier Group (E-BCG);
*Atlas PSR 46 17 Bipod, (non rotating) w/std rubber feet;
*Hawk Hill Talon Bipod feet;
*Troy Micro 45° Battle Sights;
*Stream light ProTac light w/Pressure Pad Activation;
*LMT DMR Butt stock;
* Magpul CTR Butt Stock w/ GG&G Cheek Weld Riser;
*US Optics Dayglow Yellow Level w/tube rail protector cover;
* Magpul 1&2 Point Adjustable Battle Sling;
*Atlas Mono Pod w/Yankee Hill Mount;
*Magpul Rubber Overcoat Grip;
*****with*****
*Schmidt & Bender 3-12 x 50 PM-II IL Classic w/S&B Factory Installation ART Reticle (Darrel Holland Design w/ Sun Shade and Sphur Rt Angle Set Tool. Holland "Blank" Dope Card Set, CD for Designing Personal Dope Cards and instructions/Lessons to properly use the, arguably fastest/most accurate ranging/sizing Reticle Available!!!! Sitting Atop A,
*Spuhr 3016 0° MOA Cantilever Scope Mount w/rear mounted White Level;
*Goldie Locks "Just Right" Headspace tolerance check Including the 5.56 Headspace measurement gauge used....sweet, sweet proof!;
* Pelican FDE 1720 Hard Case-case looks 80%, works 100%
The Scope was purchased used f/ NWF and sent to Darrel Holland (long-range master teacher and engineer) wherein he forwarded it on to S&B where it received an Alls Great Passing Grade!
The AXTS A-DAC Lower was purchased used but was/is in excellent condition. I was told that it was originally purchased by a well known "Thunder Ranch" Member, and was surrounded by Noveske Equipment; I was owner No. 2.
The rifle was shot 1) to break-in the Barrel, 6 shots; and 2) SA Gas Block Adjustment (time in battery and smooth cycling) & Get it on Paper w/ follow-up Consistency, 6 shots- 12 total using XM 193 & XM 855 respectively. Please let me know if you have any questions, etc. I'm in Cave Junction, but willing to ship. I've previously shipped a Nemo 308 w/o any issues or heartache!
Understanding no one wants to hear there's $7k invested $4,000
It was a patience tested 3+ years to piece together and the end result was/is worth it.
Over the last 5-8 years I've chipped away from a small collection and I'm, for the most part, whittled away to that which would be used if necessary, but age and the sordid side effects therein are out pacing the passion (s).
Thank you for your time and no, she doesn't have a name yet....
Please understand that I'm not looking for any trades, well I might take an LM or FMTV!!!!
Price is always negotiable but I'm not having a fire sale. Please respect her lineage and just barely legal age. The time taken to research and acquire parts wasn't anything anything short of a labor of love. Her Mom is a bit overweight LMT MWS 16" SS that has confirmed many times that I'm the only weak link; that was the bar I was going for. Please chance offer(s), but serious only please.
Thanks again!
Last Edited:
