Yugo Mauser rebarrel

Discussion in 'Curio & Relic Discussion' started by Boboclown, May 26, 2016.

  1. Boboclown

    Boboclown
    North Carolina
    Well-Known Member

    Messages:
    3,018
    Likes Received:
    4,813
    I have a few spare barrels that just came in and one looks a lot better than the one already on the rifle. I barely get it to shoot decent groups with good ammo. Is it worth it to swap the barrels or should I leave it as is?

    The one on there currently is pitted all the way up to the last quarter inch of the bore.
     
  2. AndyinEverson

    AndyinEverson
    Everson, Wa.
    Moderator Staff Member Bronze Supporter

    Messages:
    5,611
    Likes Received:
    25,169
    If I had a better barrel , I'd swap it out. That's what would happen in the armory so why not?
    Andy
     
    Ura-Ki likes this.
  3. Boboclown

    Boboclown
    North Carolina
    Well-Known Member

    Messages:
    3,018
    Likes Received:
    4,813
    I was more concerned with the matching numbers, but I don't plan on selling this later on.

    I guess I'll just find a gunsmith or see if I can borrow a friend's tools for it. Thanks.
     
    tdb59 likes this.
  4. AndyinEverson

    AndyinEverson
    Everson, Wa.
    Moderator Staff Member Bronze Supporter

    Messages:
    5,611
    Likes Received:
    25,169
    If not reselling then a big yes re-barrel if you want a shooter.
    Serial numbers won't help you shoot better anyway LOL.
    Andy
     
  5. Boboclown

    Boboclown
    North Carolina
    Well-Known Member

    Messages:
    3,018
    Likes Received:
    4,813
    I don't know, I heard matching serial numbers bless each bullet and make it so they shoot great. ;)

    The barrel I'm talking about has some pitting, but none on the rifling, and some of it might not be pitting since I'm not done cleaning it yet.
     
    Ura-Ki and AndyinEverson like this.
  6. MountainBear

    MountainBear
    Sweet Home, OR
    Well-Known Member

    Messages:
    4,037
    Likes Received:
    3,704
    Swap it, save it (the old barrel), and shoot the piss out of it. That is all.
     
    Ura-Ki, tdb59 and AndyinEverson like this.
  7. Boboclown

    Boboclown
    North Carolina
    Well-Known Member

    Messages:
    3,018
    Likes Received:
    4,813
    Looks like someone already beat me to it with the original barrel.

    The barrel I'm thinking of using is plum colored though. Too bad the plum part of it will be covered by wood.
     
    AndyinEverson and MountainBear like this.
  8. Velzey

    Velzey
    Estacada Gunsmith
    Büchsenmacher Bronze Vendor

    Messages:
    2,925
    Likes Received:
    5,767
    Is this yugo a 100% numbers matching ? And what markings are on the receiver? M98 ?
    I would not worry about any yugo numbers matching.. Swap it and shoot it!

    Oh and use head space gauges!
     
    AndyinEverson and MountainBear like this.
  9. Boboclown

    Boboclown
    North Carolina
    Well-Known Member

    Messages:
    3,018
    Likes Received:
    4,813
    I got a go gauge and field gauge ready. And they kinda are, but it looks like a forced match if anything. Bolt, receiver, stock, and floor plate match. Receiver and barrel match. Thought it was all matching until I took the stock off.
     

Share This Page