- Messages
- 313
- Reactions
- 639
My Father entered the 1st Oregon air National Guard in 1940. The guard was federally activated into the AAF in April 1941. He eventually landed at Utah Beach in Normandy, and he carried this throughout his service from Portland Or. to the outskirts of Berlin. He was issued this knife/sword sometime after the start of WWII.
This is a WWII Anderson Combat Fighting Knife/Stiletto with the original Sheath. Built from the 1913 Patton Saber Blade tip, made in the USA, in Glendale, Ca.
The WWII Anderson fighting knife was made from surplus WWI era M1913 Cavalry Sabers, manufactured by Springfield Arsenal in 1914. Each of these fighting daggers were built from three sections of the original M1913 saber. These are referred to as the "Patton Sword", as the original M1913 Calvary Saber was developed by General George S. Patton prior to WWI. These have also been refereed to as "non-regulation" US fighting knifes.
The Kabar Marine fighting knife didn't enter service till Nov.1942, consequently, during the first year of WWII the US had no standard-issue fighting knife and the military was desperately looking for a quick way to fill the demand for fighting knives early in the War. So someone came up with the idea of re-purposing these old Cavalry Sabers into fighting knives and daggers. A large quantity of Patton Swords and even older Civil War sabers were converted into somewhat crude, but very practical fighting knives and trench daggers. These intimidating "Patton Sword" fighters were made by a few American makers during the war, including Anderson of Glendale, California. This particular dagger is 13 1/4" long, with an 8 1/4" long blade. I remember playing with this as a small kid. Yes, I got in trouble for that. Considering its age and history, it's in very good condition. I've seen a similar one sell for over $700.00, Various condition examples can go any where from $375. to $575.
This is a WWII Anderson Combat Fighting Knife/Stiletto with the original Sheath. Built from the 1913 Patton Saber Blade tip, made in the USA, in Glendale, Ca.
The WWII Anderson fighting knife was made from surplus WWI era M1913 Cavalry Sabers, manufactured by Springfield Arsenal in 1914. Each of these fighting daggers were built from three sections of the original M1913 saber. These are referred to as the "Patton Sword", as the original M1913 Calvary Saber was developed by General George S. Patton prior to WWI. These have also been refereed to as "non-regulation" US fighting knifes.
The Kabar Marine fighting knife didn't enter service till Nov.1942, consequently, during the first year of WWII the US had no standard-issue fighting knife and the military was desperately looking for a quick way to fill the demand for fighting knives early in the War. So someone came up with the idea of re-purposing these old Cavalry Sabers into fighting knives and daggers. A large quantity of Patton Swords and even older Civil War sabers were converted into somewhat crude, but very practical fighting knives and trench daggers. These intimidating "Patton Sword" fighters were made by a few American makers during the war, including Anderson of Glendale, California. This particular dagger is 13 1/4" long, with an 8 1/4" long blade. I remember playing with this as a small kid. Yes, I got in trouble for that. Considering its age and history, it's in very good condition. I've seen a similar one sell for over $700.00, Various condition examples can go any where from $375. to $575.