WTS .22 M4A2 upper with spikes barrel Choice of A2 or A3 receiver READ OPTIONS

eldbillbo · Oct 19, 2019

This does not include the .22 conversion kit. but should work with most .22 conversion kits. This uses a spikes barrel.

Spikes dedicated .22 barrel with A2 upper receiver. The A2 had a blem as shown in the photo but I can replace it with a new receiver for an additional cost.

Optional collar (non NIB) that fits $35 with this collar you pop off your existing chamber adaptor and pop it on to fit the dedicated barrel

The price is $255 with the A2 receiver. If you prefer a flat top receiver $180
The collar is $35

I can part it out if you only want Parts of it.
A2 receiver $140
.22 Barrel with free collar stripped (no Flash hider or delta ring assembly) $95
Add $35 for a collar that fits correctly

MORE PARTS

Colt and FN parts Sp1 and M4 and A2

Colt Ar15 SP1 Upper receiver $185 and Bolt carrier Group $125

Sp1 upper receiver in excellent condition except for the ejection port cover which I believe is still a colt just not era correct $185 this has the tiny colt proof marks in front of the ejection port with no other markings Colt Sp1 bolt carrier group C marked Carrier MPC marked Bolt $135 This...

www.northwestfirearms.com

M16A1 , model 603 Clone Upper,

Ar15 M16A1 Clone Upper Retro 70s era Upper.

I AM PUTTING TOGETHER A 604 Version the same way by with a 1/12 barrel) Stay tuned MORE PARTS M16A1 , model 603 Clone Upper, https://www.northwestfirearms.com/threads/ar15-m16a1-clone-upper-retro-70s-era-upper.308868/ Dedicated .22 Ar15 Car-15 M4 upper...

www.northwestfirearms.com

Flat top low profile ar15 upper with Anderson barrel

Ar15 Flat top upper with 16" barrel $160

The gas block is buggered up because it's really tight which is a good thing. $160 no BCG and CH. Trades wanted Colt Ar15 Parts. Plastic 80% lower with Jig kit, Left-handed Ar15 parts and accessories.

www.northwestfirearms.com

M4A2 Carbine style upper

Unknown Brand upper barrel is not chrome lined. The receiver does have some finish wear on the carry handle so don't expect a safe queen FSB uses a roll pin or straight pin not taper pins but it solid (no Bolt carrier group or charging handled) $250 Or would trade for or towards a Colt A1 or A2...

www.northwestfirearms.com

264 LBC (6.5 Grendel) Type 2 Complete Upper For those of you what to hunt with your Ar15

264 LBC (6.5 Grendel) Type 2 Complete Upper with Carbon Fiber FF tube $335 OPTIONS ADDED

This is a complete upper barrel is a BHA 264LBC 16" 1/9 twist. The barrel nut on the lightweight heat-dissipating carbon fiber float tube is a little chewed up but unless you are removing it, it is fine. It's complete with BCG and CH. less than 300 rds fired. If you don't want the float tube I...

www.northwestfirearms.com

M4 A2 Upper with 14.5" Bushmaster barrel Pinned flashhider for 16" barrel length

No Longer available

No longer available

www.northwestfirearms.com

Spikes Tactical Barrels !!NEW SPIKES NIB BOLT ADDED 9/4!!!

Top is Mid-length gas system 1/7 twist chrome line with FSB $185 2nd is a 14.5 chrome lined hammer forged barrel it had a pinned flash hider one it so the threads there is a dimple in the threads $120 Bottom low profile gas block is held on by taper pin and set screw so it won't move. the...

www.northwestfirearms.com

Dedicated .22 Ar15 Car-15 M4 upper.

WTS .22 M4A2 upper with spikes barrel Choice of A2 or A3 receiver READ OPTIONS

This does not include the .22 conversion kit. but should work with most .22 conversion kits. This uses a spikes barrel. Spikes dedicated .22 barrel with A2 upper receiver. The A2 had a blem as shown in the photo but I can replace it with a new receiver for an additional cost. Optional collar...

www.northwestfirearms.com