World's first 2 inch barrel AR-15 SBR

Discussion in 'Rifle Discussion' started by Lance Jacobs, Aug 3, 2015.

  1. Lance Jacobs

    Lance Jacobs
    South Willamette Valley Oregon
    Well-Known Member

    Messages:
    3,106
    Likes Received:
    3,438
    People are taking AR-15 barrels down to ridiculously short lengths these day.

    Do you know of any usage where a 2 inch barrel would be the preferable length to use?


    Here is a video of it in action:


    .
     
  2. 66PonyCar

    66PonyCar
    Tigard, OR
    Bronze Supporter Bronze Supporter

    Messages:
    537
    Likes Received:
    1,524
    I'm looking at this really close and I could swear I can see the tip of the bullet stick out after each shot. I don't think there's enough barrel to stabilize the bullet.
     
    Caveman Jim likes this.
  3. IronMonster

    IronMonster
    Free Idaho!
    Opinionated Member Lifetime Supporter

    Messages:
    4,830
    Likes Received:
    8,862
    There is no barrel, just a chamber. ( a 5.56 round is about 2" and barrel length is measured from the bolt face)
     
  4. BillM

    BillM
    Amity OR
    Bronze Supporter Bronze Supporter

    Messages:
    1,095
    Likes Received:
    557
    Interesting. Does that thing look like it's firing from an open bolt to anyone else?
    Looks like they are tapping gas right at the mouth of the case.
     
  5. spectra

    spectra
    The Couve
    Moderator Staff Member

    Messages:
    1,921
    Likes Received:
    742
    Your not seeing things the round does stick out.

    Go directly to the vid and there sure are a lot of haters out there :D
     
  6. Lance Jacobs

    Lance Jacobs
    South Willamette Valley Oregon
    Well-Known Member

    Messages:
    3,106
    Likes Received:
    3,438

    So if there really is zero barrel, what will velocity and accuracy be like firing out of just a chamber?

    .
     
  7. IronMonster

    IronMonster
    Free Idaho!
    Opinionated Member Lifetime Supporter

    Messages:
    4,830
    Likes Received:
    8,862
    Well..... That is a fine question. My guess is it would sting a bit to get shot by this thing unless you had on a heavy leather coat. Probably put your eye out at 50 feet.
     
  8. 66PonyCar

    66PonyCar
    Tigard, OR
    Bronze Supporter Bronze Supporter

    Messages:
    537
    Likes Received:
    1,524
    I think it would probably start tumbling and lose velocity pretty quickly.
     
  9. DuneHopper

    DuneHopper
    Unity = Strength
    Bronze Supporter Bronze Supporter

    Messages:
    2,569
    Likes Received:
    5,052
    I can think of a 1000 why's when I see people do odd crap to firearms, I cant think of a reason that would make it viable for any serious use in this case.
     
  10. Caveman Jim

    Caveman Jim
    West of Oly
    Springer Slayer 2016 Volunteer 2017 Volunteer

    Messages:
    7,103
    Likes Received:
    14,603
    This right here is as stupid as those clowns wearing pants below their butt (prison sex alerts)!!!!:eek:
     
  11. mkwerx

    mkwerx
    Forest Grove, OR
    Silver Supporter Silver Supporter

    Messages:
    2,140
    Likes Received:
    3,252
    An example of "because we can" engineering. No practical purpose needed. Kind of like the Desert Eagle - it's showy and blingy but serves no practical purpose other than to Holywood - no one seriously carries one as a defensive weapon with the possible exception of "gangsta rappers" - even then I would suspect Glocks and Hi Points to be in far more common use, they're not a gun you would take hunting, they're safe queens and range toys. If someone enjoys shooting it, that's enough of a purpose. I bet the guys who built that had fun doing it and getting it to run right.
     
    DuneHopper and JRuby like this.
  12. Deebow

    Deebow
    Portland
    Well-Known Member

    Messages:
    463
    Likes Received:
    817
    About as useful as a poopy flavored lollipop.:cool:
     
    Caveman Jim likes this.
  13. jbett98

    jbett98
    NW Oregon
    Bronze Supporter Bronze Supporter

    Messages:
    7,392
    Likes Received:
    10,637
    There was a guy at the Saddle Butte Machine Gun Shoot a couple of years ago that built an AR-10 SBR with a 2" barrel.
    Boy did that thing bark. He was next to a .50 cal Barrett and between the two it was just as loud, plus it had a nasty sonic crack that hurt no matter how good your hearing protection was if you were standing next to him.
     
  14. Vaultman

    Vaultman
    Clackamas Co, Oregon
    Well-Known Member

    Messages:
    351
    Likes Received:
    315
    Where is his 6-25x56 scope?
     
  15. Liberty97045

    Liberty97045
    Oregon City
    Well-Known Member

    Messages:
    745
    Likes Received:
    605
    "Knock Knock"
     
  16. jbett98

    jbett98
    NW Oregon
    Bronze Supporter Bronze Supporter

    Messages:
    7,392
    Likes Received:
    10,637
    "Who's there?"
     

Share This Page