- Messages
- 26
- Reactions
- 33
I've got at least 4 different profiles for 44 Magnum alone.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I just stick with the 240 SWC's and then the 240 JSP's. I've got too many different things to deal with already.I've got at least 4 different profiles for 44 Magnum alone.
Yes, and uniforming the cavity at the same time.I had problems with my cast HP for 9mm. The seating plug was squishing my bullets just enough to keep them from chambering. My solution was to put a piece of threaded rod into my drill press and contour it to the same dimensions as the hollow point plug and, "seat" them, without deforming by pressing on the inside of the bullet.
View attachment 882967 View attachment 882969
Waytago!!! Capn Jack!!!I got out my old Redding scale, bent T spoon, funnel and the loading block I made out of PVC tubing. Then I measured out 50 gr. of FFG into each of the loading tubes I use to charge my rifle and I was done.
All ready for my next trip to the range.