What did you reload today?

74bronco · Feb 2, 2019

orygun said:
Have you shot the Game Changers yet? I shoot Game Kings and am intrigued with the Game Changer (TGK). Wondering if you had any insight.

yes ive shot quite a few, in a psa ar 10 that i cant get to shoot much of anything decent it happens to really like this bullet, was having trouble getting even 1.5 moa out of many bullets i tried , got it to finally shoot near .75 with the sierra GC, with either winchester 760 or h4350 around 2850 fps,

the above loads are for a savage axis that was also having a hard time with heavier bullets , with the GC .040 off lands and 42g h4350 , got it to shoot a .700 @ 2780 fps . it was one of several loads i tried with many bullets, 123 eldm, 143 eldx, 140 rdf, berger 130 and 140 vldH's and shot much better then those in this gun. hoping one of the above combos tightens it up a touch more.
im liking them so far, hoping terminal performance on game is as good as the eldx series. bc could be a touch better compared to some other 130 class bullets , but if it shoots better who cares about a few % of bc.

11Charlie · Feb 2, 2019

Got 100 308 casess sized and ready to go!

oremike · Feb 2, 2019

Yesterday was 44 Mag day, today is 10mm day, tomorrow I'll mix it up with 44-40 and 32 H&R then 38 and 357 for the rest of the week.

LSWC · Feb 3, 2019

Saturday & today has been good -
Kicked things off with .380, then some 95 & 147g 9mm. Have always shot the 115/124g so wanted to try both of the other weights. Kicked off today with some .357 & .38, and closed with a few hundred HDY HAP 115g 9mm. All set for my next outing!

old11bravo · Feb 3, 2019

Nice picture too!

CA of K · Feb 15, 2019

Receiving a Lyman Gen 5 powder scale and dispenser today. Hopefully, help with those pesky to meter powders. Anyone with tips or tricks.

LSWC · Feb 15, 2019

185,200,230g XTP & Speer RN/GD with Power Pistol, Unique, Bullseye, & Blue Dot. 100 high power 45acp freedom seeds...

Caveman Jim · Feb 16, 2019

I'm getting closer to being able to return to reloading, I just have to finish installing a few trim pieces and paint the crown molding then I can move my bench and my wall Locker's in and get busy.

kenboy · Feb 16, 2019

100 rounds of 32-20 for my 100 year old smith & wesson revolver. Trail boss and 78 gr lead.

erslll · Feb 17, 2019

(100) of each

6.5 CM, 140 ELD-M
308, 175 SMK
223, 55 VMAX
9mm, 124 Berry's RN

tac · Feb 17, 2019

Didn't do any today - it's still only just past 8 am here in yUK. But yesterday I made up some plinking loads in .45-70 Govt. Does that count?

erslll · Feb 17, 2019

(200) of 223, 55 VMAX

Oathkeeper1775 · Feb 17, 2019

Completed some test loads; .38Spl & .357M.

All 158 grain; but titegroup in the .38Spl, and H110 in the .357M.

5 toppings:
2 Magtechs
RMR plated hollowpoints
Remington
Speer

Mooseknuckles · Feb 17, 2019

Did some test loads for my 338 lapua today. The 90 grain load and 88.5 grain are the two I am going to mess with.

Member 34319 · Feb 17, 2019

I did up a stepped down ladder of H110 in a 180g 357mag load to try to get under the 1120fps mark. I was around 1150-1200 with my first ladder. Want to try to get and stay at 1050-1100.

Broke down and bought some 200 grain .358 (35 cal) bullets. Need to hit up the store and grab a pound of lil gun too.

LSWC · Feb 18, 2019

I had a full box of .224 50g ZMax rounds I dug into today. Only lost one case & primer along the way & the XBR metered well.
Need an empty 30cal ammo can now

Jeedia · Feb 18, 2019

Just finished 2000 9mm 147gn. Bullet with 3.0gn of tight group. Got it all case gauged and boxed up.

Rudedog · Feb 18, 2019

I finished the last step on .45 ACP. I had 127 loose fmj bought at a gun show. I used the Lee taper crimp on them. Then deprimed 200 .38 special. I am going to load some .357 and. .38 before going back to .223 and 5.56. Then 8x57. The next tool I need to buy is a caliper. I have two now and want a higher quality tool.

old11bravo · Feb 19, 2019

.
I went shooting again today with the Mega Maten AR10 and some test loads in .308 that I put together. The IMR 4895 at 43.0 grains looks promising with the 175gr SMK's. It was a 100 yard day with a temperature of 34° and overcast at 10:00am. I had fun again, just like yesterday, I was at the range.