What did you reload today?

John Gault

Messages
1,185
Reactions
884
50 rounds of 300 BKO
25 rounds of 110 grain Zmax with 15.5 grain N110
that I've determined to be pretty dependable and 25 rounds of 110 grain Zmax using H110 in variable charges of 5 each.. I'm still working upwards from 18 grain and downwards from 20 grains in .2 to .4 charge.
I prefer the N110 for accuracy but it does not meter well for me.. Every round has to be trickled in.
The H110 is super flawless metering. Set it and forget it..

20190106_004659.jpg
 
OP
Haftard
Messages
537
Reactions
359
Started 2 days ago setting up for 9mm after finishing off the last of my 45 components.
First day I did 1K of 147 grain FP and Titegroup. This morning I started my second box (1K)
of the 147 FP. This is my IDPA load.:D
You sir are stronger then I ... I cannot stand to reload 9mm when I can pick up 500 rounds for less then 90 bucks ...
 
Messages
428
Reactions
456
You sir are stronger then I ... I cannot stand to reload 9mm when I can pick up 500 rounds for less then 90 bucks ...
That 500 runs me about 27.00 with my coated cast bullet not that big a difference until you shoot a couple thousand a month.

I have 1500 small pistol primers in tubes waiting for me to load the rest of this months Match ammo (141gr cast at 1025 fps) later today.
 
Messages
3,579
Reactions
3,466
That 500 runs me about 27.00 with my coated cast bullet not that big a difference until you shoot a couple thousand a month.

I have 1500 small pistol primers in tubes waiting for me to load the rest of this months Match ammo (141gr cast at 1025 fps) later today.
That's pretty cheap when you consider primers are roughly 3 cents a piece and powder is about 1 to 1 1/2 cents each.
 
Messages
428
Reactions
456
That's pretty cheap when you consider primers are roughly 3 cents a piece and powder is about 1 to 1 1/2 cents each.
I can cast and coat 1000 bullets for about 20.00 (though it's not really feasible economically since I have about 1.5hrs per thousand to cast, coat and size and you can buy coated for around 70$ per thousand by I enjoy it as a hobby) , powder is right at 12.00 per thousand rounds and primers 30.00 so 62.00 per thousand since I ran out of 20.00 s&b primers.
 
OP
Haftard
Messages
537
Reactions
359
I can cast and coat 1000 bullets for about 20.00 (though it's not really feasible economically since I have about 1.5hrs per thousand to cast, coat and size and you can buy coated for around 70$ per thousand by I enjoy it as a hobby) , powder is right at 12.00 per thousand rounds and primers 30.00 so 62.00 per thousand since I ran out of 20.00 s&b primers.
I cant see howbit would only take an 1.5 hours to cast 1000 bullets .,. I might have to employ you if you cast 357 ? Lol ... What press are you using and what do you use to cast?
 

UPCOMING EVENTS

Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
Cerberus Training Group - Run the Gun Pistol
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Run the Gun Rifle
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA

LATEST RESOURCE REVIEWS

  • Money Market Pawn Shop
    5.00 star(s)
    Excellent transfer and very helpful
    Was there yesterday and had my first private party transfer done. Went really smoothly and pj was very helpful. He was willing to make an...
  • MTS Enterprises Of WA
    5.00 star(s)
    Great guy to work with!
    Joe is a great guy to work with. A++++
  • Axis Manufacturing
    5.00 star(s)
    Axis Manufacturing is a pretty small shop located near the Spokane County Fairgrounds. Small does not mean underwhelming here. This shop really is...
  • Lucky Sporting Goods
    5.00 star(s)
    Honest and Knowledgeable Gun Guy
    I made arrangements to go out to Banks, Oregon to purchase a 300 Blackout rifle Jeremy built. It seemed to be exactly what I was looking for and...
  • Gooseneck Road
    4.00 star(s)
    8/1/2020
    We went there today, at the righthand fork past the shooter info sign, and at the spot where there's a fallen log across a trail; good backstop...
Top Bottom