Wanna make your own bullets? Here's the machine...

Discussion in 'Ammunition & Reloading' started by AMProducts, Aug 2, 2012.

  1. AMProducts

    AMProducts
    Maple Valley, WA
    Jerk, Ammo Manufacturer

    Messages:
    2,920
    Likes Received:
    2,103
  2. deadshot2

    deadshot2
    NW Quadrant WA State
    Well-Known Member

    Messages:
    2,407
    Likes Received:
    541
    Not to mention finding all the missing parts and then reinforcing the floor in your garage so the machine does't bust up the concrete. Better yet, just cut it out and pour a foot thick slab to anchor the machine to.

    Also, considering that the condition is "fair", be prepared to do an overhaul soon. But isn't that why the machine is available for sale anyway:laugh:


    If you buy one of these you might as well go all the way and get the equipment to make brass cases too.
     
  3. Trailboss

    Trailboss
    Vancouver, WA
    Well-Known Member

    Messages:
    1,042
    Likes Received:
    1,048
    Interesting to think I've been doing it all these years with a bullet mold I paid $10 for at a local gun show.
     
  4. jonn5335

    jonn5335
    Longview
    Active Member

    Messages:
    845
    Likes Received:
    236
    I feel like I got a raw deal I payed $16 for mine
     
  5. Sheldon

    Sheldon
    California
    Member

    Messages:
    70
    Likes Received:
    10
    It's in Missouri. Wonder if it's an old Sierra Bullets machine??
     

Share This Page