Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
I just went nuts at the gun show and bought thee purdiest Browning 1885 you could want to behold.
26in barrel.
So y'all have some recipes for this style gun?
Target or hunting is fine.
So what's your favorites?
My favorite cartridge. Have you slugged your bore? I have two Marlin 1895's and use a variety of bullets from Hornady to Laser Cast. Powders are Trail Boss, 5744, Unique, H4895, and H3031. All depends on the combo and your gun.
I use Trailboss and 5744 for my reduced, cast bullet loads, and IMR4198 or RL7 for 325gr, Hornady FTX and other jacketed bullet loads. You can also try Hodgdon/Hornady LeveRevolution powder if you can find some. I like 405gr and Trailboss for my subsonics.
Around 28-30gr of AA5744 produced accurate, low SD loads, under a 405gr LFN on my Guide Gun. And won't bruise your shoulder while developing the load.
Thanks for the info. I'll try as many as I can. Found out my friend scored about 100 brass and bullets
I guess I'll need to go to Moscow for about a week this year to stretch out a couple rifles I have now
Another friend asked me if I would be hunting elk with it over by Forks
Hahaha,no. This will be a dry country gun for sure.
I guess I should put up pictures.
This thread is in fact worthless with out pictures..
Sweet. I have always wanted a 45-70. Just havent done it yet. Watched a 1000yrd shoot once all done with sharps trapdoor and 45-70! Great holly lob a lead batman!!
My favorite load was a bunch of RL7 under the 400gr Speer. 2050fps out of the 24" barrel of the B78 and still could have gone hotter. I thought that was about enough.
100 brass will last you a lifetime. You really can't wear it out. 405gr laser with 12.8 trailboss goes about 1100fps out of my 32in. bbl. Very accurate!
Here's a load book in one sentence: With jacketed bullets you can cram all the IMR3031 you can fit under any jacketed bullet of any weight and go to town with your strong-actioned '85.
(The buttplate will correspondingly go to town on your shoulder.) DO NOT use this one-sentence loadbook for ANY other action, other than a Ruger #1, or a Siamese Mauser.
5744 powder is good for smokeless duplication of blackpowder velocities.
For a good "Buffalo Rifle Load", in all authenticity, a Lyman 457125 cast bullet (about 525grains, depending on alloy) over a waxboard wad and 60 grains of Swiss FFg blackpowder, drop tubed into the case and ignited by a Federal 215 Magnum Primer will allow you to win friends and influence people.
Mike this is a one year old thread revived. Did you every work up a load for your 1886? Are you shooting it? You were excited a year ago - still have that excitement? These rifles are awesome! Inquiring minds gotta know!
If our Supporting Vendors don't have what you're looking for, use these links before making a purchase and we will receive a small percentage of the sale